The Multi-Stage Drawing Process of Zinc-Coated Medium-Carbon Steel Wires in Conventional and Hydrodynamic Dies

por Suliga, Maciej, Wartacz, Radosław, Hawryluk, Marek
Publicado 2020

Application of 3D Scanning as an Indirect Method to Analyze and Eliminate Errors on the Manufactured Yoke-Type Forgings Forged in SMED Device on Modernized Crank Press

por Ziemba, Jacek, Hawryluk, Marek, Rychlik, Marcin
Publicado 2020

The Impact of the Lubricant Dose on the Reduction of Wear Dies Used in the Forging Process of the Valve Forging

por Dworzak, Łukasz, Hawryluk, Marek, Janik, Marta
Publicado 2021

Assessment of the Possibility of Reducing Energy Consumption and Environmental Pollution in the Steel Wire Manufacturing Process

por Suliga, Maciej, Wartacz, Radosław, Kostrzewa, Joanna, Hawryluk, Marek
Publicado 2023

The Effect of Drawing in Conventional and Hydrodynamic Dies on Structure and Corrosion Resistance of Hot-Dip Galvanized Zinc Coatings on Medium-Carbon Steel Wire

por Suliga, Maciej, Wartacz, Radosław, Hawryluk, Marek, Kostrzewa, Joanna
Publicado 2022

Development of Induction Heating System Ensuring Increased Heating Efficiency of the Charge Material in a Forging

por Hawryluk, Marek, Rychlik, Marcin, Pietrzak, Michał, Górski, Piotr, Marzec, Jan
Publicado 2022

Metallographic Evaluation of Increased Susceptibility to Intermediate Embrittlement of Engine Valve Forgings Made of NCF 3015 High Nickel and Chromium Steel

por Lachowicz, Marzena M., Zwierzchowski, Maciej, Hawryluk, Marek, Gronostajski, Zbigniew, Janik, Marta
Publicado 2023

Preliminary Studies of the Durability of Tools Used to Form Ceramic Tiles Made of Hardox 600 and NC11LV Steel

por Marzec, Jan, Hawryluk, Marek, Rychlik, Marcin, Lachowicz, Marzena M., Suliga, Maciej
Publicado 2021

Comparative Analysis of the Wear of NC11LV and Hardox 600 Steel Used in Tools for Extrusion of Clay Strands in the Process of Producing Ceramic Roof Tiles

por Hawryluk, Marek, Lachowicz, Marzena M., Marzec, Jan, Nowak, Kamila, Suliga, Maciej
Publicado 2022

Wear Mechanisms of the Forging Tool Used in Pre-Forming in a Double Forging System of Truck Parts

por Krawczyk, Janusz, Łukaszek-Sołek, Aneta, Lisiecki, Łukasz, Śleboda, Tomasz, Hawryluk, Marek
Publicado 2022

Support Possibilities for 3D Scanning of Forging Tools with Deep and Slim Impressions for an Evaluation of Wear by Means of Replication Methods

por Hawryluk, Marek, Gronostajski, Zbigniew, Ziemba, Jacek, Janik, Marta, Górski, Piotr, Lisowski, Miłosz
Publicado 2020

Structural Features of Fatigue Crack Propagation of a Forging Die Made of Chromium–Molybdenum–Vanadium Tool Steel on Its Durability

por Hawryluk, Marek, Lachowicz, Marzena, Łukaszek-Sołek, Aneta, Lisiecki, Łukasz, Ficak, Grzegorz, Cygan, Piotr
Publicado 2023

Development of Preliminary Precision Forging Technology and Concept for Tools Used to Reforge 60E1A6 Profile Needle Rails with the Use of Numerical and Physical Modeling

por Hawryluk, Marek, Cygan, Piotr, Krawczyk, Jakub, Barełkowski, Artur, Ziemba, Jacek, Lewandowski, Filip, Wieczorek, Igor
Publicado 2023

Wear Analysis of Forging Tools Used in an Industrial Production Process—Hot Forging in Closed Dies of the “Head-Disk” of an Engine Valve Forging

por Hawryluk, Marek, Ziemba, Jacek, Janik, Marta, Górski, Piotr, Dudkiewicz, Łukasz, Głód, Kornelia, Krawczyk, Jakub
Publicado 2021

Application of a Prototype Thermoplastic Treatment Line in Order to Design a Thermal Treatment Process of Forgings with the Use of the Heat from the Forging Process

por Hawryluk, Marek, Gronostajski, Zbigniew, Zwierzchowski, Maciej, Jabłoński, Paweł, Barełkowski, Artur, Krawczyk, Jakub, Jaśkiewicz, Karol, Rychlik, Marcin
Publicado 2020