Integration of the CMS regional calorimeter Trigger hardware into the CMS level-1 Trigger

The electronics for the Regional Calorimeter Trigger (RCT) of the Compact Muon Solenoid Experiment (CMS) have been produced and tested. The RCT hardware consists of 18 double-sided crates containing custom boards, ASICs, and backplanes. The RCT receives 8-bit energies and a data quality bit from the...

Descripción completa

Detalles Bibliográficos
Autores principales: Klabbers, Pamela, Dasu, S, Grothe, M, Górski, T, Jaworski, M, Lackey, J, Robl, P, Smith, W H
Lenguaje:eng
Publicado: CERN 2007
Materias:
Detectors and Experimental Techniques
Acceso en línea:https://dx.doi.org/10.5170/CERN-2007-001.269
https://dx.doi.org/10.5170/CERN-2007-007.241
http://cds.cern.ch/record/1027477
Descripción
Sumario:The electronics for the Regional Calorimeter Trigger (RCT) of the Compact Muon Solenoid Experiment (CMS) have been produced and tested. The RCT hardware consists of 18 double-sided crates containing custom boards, ASICs, and backplanes. The RCT receives 8-bit energies and a data quality bit from the HCAL and ECAL Trigger Primitive Generators (TPGs) and sends it to the CMS Global Calorimeter Trigger (GCT) after processing. Before installation, integration tests were performed. Data was successfully received from the TPG electronics and read out with a RCT Jet Capture Card. These tests, other tests involving more trigger subsystems, their results, and the RCT installation will be described.

Ejemplares similares