Hierarchical Control of the ATLAS Experiment

Control systems at High Energy Physics (HEP) experiments are becoming increasingly complex mainly due to the size, complexity and data volume associated to the front-end instrumentation. In particular, this becomes visible for the ATLAS experiment at the LHC accelerator at CERN. ATLAS will be the largest particle detector ever built, result of an international collaboration of more than 150 institutes. The experiment is composed of 9 different specialized sub-detectors that perform different tasks and have different requirements for operation. The system in charge of the safe and coherent operation of the whole experiment is called Detector Control System (DCS). This thesis presents the integration of the ATLAS DCS into a global control tree following the natural segmentation of the experiment into sub-detectors and smaller sub-systems. The integration of the many different systems composing the DCS includes issues such as: back-end organization, process model identification, fault detection, synchronization with external systems, automation of processes and supervisory control. Distributed control modeling is applied to the widely distributed devices that coexist in ATLAS. Thus, control is achieved by means of many distributed, autonomous and co-operative entities that are hierarchically organized and follow a finite-state machine logic. The key to integration of these systems lies in the so called Finite State Machine tool (FSM), which is based on two main enabling technologies: a SCADA product, and the State Manager Interface (SMI++) toolkit. The SMI++ toolkit has been already used with success in two previous HEP experiments providing functionality such as: an object-oriented language, a finite-state machine logic, an interface to develop expert systems, and a platform-independent communication protocol. This functionality is then used at all levels of the experiment operation process, ranging from the overall supervision down to device integration, enabling the overall sequencing and automation of the experiment. Although the experience gained in the past is an important input for the design of the detector's control hierarchy, further requirements arose due to the complexity and size of ATLAS. In total, around 200.000 channels will be supervised by the DCS and the final control tree will be hundreds of times bigger than any of the antecedents. Thus, in order to apply a hierarchical control model to the ATLAS DCS, a common approach has been proposed to ensure homogeneity between the large-scale distributed software ensembles of sub-detectors. A standard architecture and a human interface have been defined with emphasis on the early detection, monitoring and diagnosis of faults based on a dynamic fault-data mechanism. This mechanism relies on two parallel communication paths that manage the faults while providing a clear description of the detector conditions. The DCS information is split and handled by different types of SMI++ objects; whilst one path of objects manages the operational mode of the system, the other is to handle eventual faults. The proposed strategy has been validated through many different tests with positive results in both functionality and performance. This strategy has been successfully implemented and constitutes the ATLAS standard to build the global control tree. During the operation of the experiment, the DCS, responsible for the detector operation, must be synchronized with the data acquisition system which is in charge of the physics data taking process. The interaction between both systems has so far been limited, but becomes increasingly important as the detector nears completion. A prototype implementation, ready to be used during the sub-detector integration, has achieved data reconciliation by mapping the different segments of the data acquisition system into the DCS control tree. The adopted solution allows the data acquisition control applications to command different DCS sections independently and prevents incorrect physics data taking caused by a failure in a detector part. Finally, the human-machine interface presents and controls the DCS data in the ATLAS control room. The main challenges faced during the design and development phases were: how to support the operator in controlling this large system, how to maintain integration across many displays, and how to provide an effective navigation. These issues have been solved by combining the functionalities provided by both, the SCADA product and the FSM tool. The control hierarchy provides an intuitive structure for the organization of many different displays that are needed for the visualization of the experiment conditions. Each node in the tree represents a workspace that contains the functional information associated with its abstraction level within the hierarchy. By means of an effective navigation, any workspace of the control tree is accessible by the operator or detector expert within a common human interface layout. The interface is modular and flexible enough to be accommodated to new operational scenarios, fulfil the necessities of the different kind of users and facilitate the maintenance during the long lifetime of the detector of up to 20 years. The interface is in use since several months, and the sub-detector's control hierarchies, together with their associated displays, are currently being integrated into the common human-machine interface.