Cargando…
An inexpensive spectroscopic beam monitor for hard X-ray synchrotron applications
We describe an inexpensive beam monitor for hard X-ray synchrotron applications which has good spectroscopic abilities and can operate without cooling. The device is centred on an inexpensive, commercial off-the-shelf, large area (1.2 × 1.2 mm2) Si photodiode operated in single counting mode. Measur...
Autores principales: | , , , , , , |
---|---|
Lenguaje: | eng |
Publicado: |
2007
|
Materias: | |
Acceso en línea: | http://cds.cern.ch/record/1037586 |
Sumario: | We describe an inexpensive beam monitor for hard X-ray synchrotron applications which has good spectroscopic abilities and can operate without cooling. The device is centred on an inexpensive, commercial off-the-shelf, large area (1.2 × 1.2 mm2) Si photodiode operated in single counting mode. Measurements carried out at the HASYLAB synchrotron research facility have shown that it is fully spectroscopic across the energy range 8 keV to 100 keV with a measured energy resolution of ~ 1.2 keV FWHM at room temperature. The measured resolutions were found to be the same under pencil-beam and full-area illumination, indicating uniform crystallinity and stoichiometry of the bulk. The low cost, simplicity and performance of the detector make it suitable for a wider range of applications, e.g., in undergraduate laboratory experiments. |
---|