A complete system for controlling and monitoring the timing of the LHCb experiment

The LHCb experiment at CERN will study the results of the production of B/antiB in the LHC accelerator mesons with the higher precision ever. It is vital that the experiment is able to record sub-detectors signals at the optimal detector efficiency, referring to the right collision occurring in the LHC ring, and that those signals are stable, clean and reliable. The solution is the development of a complete system to centrally time align and at the same time to monitor the timing of the whole experiment. An electronics custom-made acquisition board, called Beam Phase and Intensity Monitor (BPIM), has the main aim to monitor the beam processing a bipolar signal coming from a dedicated Beam Pick-Up detector, sitting along the LHC ring and whose signal is a clear representation of the bunches of protons. The BPIM is then able to integrate the intensity of the beam and at the same time to compare the phase of the bunch signal with the clock coming from the timing distribution system as well as the phase of the orbit signal with the signal generated from the first beam bunch. The principal applications of the BPIM are to determine the position of the orbit signal locally, to monitor bunch-by-bunch the clock phase with respect to the bunch passing through the detector, to have a clear structure of the beam injected, to determine the exact trigger conditions for sampling events in the detector, to determine the exact trigger conditions for significative events of not, checking whether the detector samples a bunch with protons (or lead ions) or an empty bunch, to produce an empty crossing veto for the sampled events whenever a bunch is absent in the expected location, to have a relative measure of the intensities of bunch, to have instantaneaous information about the presence/absence of beam, and, not less important, to search for ghost bunches. The board is paired with the RF2TTC system developed by the LHC group and whose aim is to control, clean, convert and transmit the bunch clock (~40 MHz) and the orbit clock (~11 KHz) to the the whole experiment. A complete user-friendly interface system, developed using the SCADA software PVSS II with the Distributed Information Management (DIM) system as communication protocol, allows to control and monitor real-time the available information.