Controller of a new pulsed source for linac 4 (MEGADISCAP)

This document presents the implementation of a control system for a new multiple-stage pulsed current source converter. A new topology that has been proposed to overcome some limitations inherent to capacitor discharge converter is presented in detail and explained. Its implementation is described and the design considerations adopted are accounted for. Besides, a control strategy is proposed, which has been implemented using an existing control board with some modifications on the acquisition system. A prototype whose current and voltage are scaled down with respect to those required for the converters that will be used for CERN Booster injection with LINAC 4 has been built. This reduced scale system has been simulated taking into account the control system implementation. Finally, the topology operating principle has been validated, the results obtained with the scaled down prototype have been compared with simulations and the need for more hardware resources for the control system implementation has been demonstrated.