ATLAS Silicon Microstrip Tracker Operation

The ATLAS experiment at the CERN Large Hadron Collider (LHC) has started taking data last autumn with the inauguration of the LHC. The SemiConductor Tracker (SCT) is the key precision tracking device in ATLAS, made up from silicon micro-strip detectors processed in the planar p-in-n technology. The completed SCT has been installed inside the ATLAS experimental hall. Since then the detector was operated for many months under realistic conditions. Calibration data has been taken and analyzed to determine the noise performance of the system. In addition, extensive commissioning with cosmic ray events has been performed both with and without magnetic field. The cosmic muon data has been used to align the detector, to check the timing of the front-end electronics as well as to measure the hit efficiency of modules. The sensor behavior in magnetic field was studied by measurements of the Lorentz angle. For the initial running with unfocused LHC beam operation with undepleted sensors is foreseen. Efficiency and noise determination for various bias voltages was also performed. The current status of the SCT will be reviewed, including results from this year's latest data-taking periods, and from the detector alignment. We will report on the commissioning of the detector, including overviews on services, connectivity and observed problems. The SCT commissioning and running experience will then be used to extract valuable lessons for futu re silicon strip detector projects.