Control server for the PS orbit acquisition system Status 2009

CERN’s Proton Synchrotron (CPS) has been fitted with a new Trajectory Measurement System (TMS). Analogue signals from forty Beam Position Monitors (BPM) are digitized at 125 MS/s, and then further treated in the digital domain to derive positions of all individual particle bunches on the fly. Large FPGAs are used to handle the digital processing. The system fits in fourteen plug-in modules distributed over three half-width cPCI crates that store data in circular buffers. They are connected to a Linux computer by means of a private Gigabit Ethernet segment. Dedicated server software, running under Linux, knits the system into a coherent whole [1]. The corresponding low-level software using FESA (BPMOPS class) was implemented while respecting the standard interface for beam position measurements. The BPMOPS server publishes values on request after data extraction and conversion from the TMS server. This software is running on a VME Lynx-OS platform and through dedicated electronics it can therefore control the pickup sensitivities also making it a complete system. APIs for hardware experts are also available in order to either calibrate the system or to adjust the different TMS settings needed for each cycle. Running this system in operational mode has already given very good results compared to the old CODD system and some of them will be presented in this document