Control of the MKQA tuning and aperture kickers of the LHC

The large hadron collider (LHC) at CERN has been equipped with four fast pulsed kicker magnets in RA43 situated at point 4 which are part of the measurement system for the tune and the dynamic aperture of the LHC beam (Beam 1 and Beam 2). For the tune measurement 'Q', the magnets will excite oscillations in part of the beam. This is achieved by means of a generator producing a 5 µs base half-sine pulse of 1.2 kA [1] amplitude, superimposed with a 3rd harmonic to produce a 2 µs flat top. A kick repetition rate of 2 Hz will be possible. To measure the dynamic aperture 'A' of the LHC at different beam energies, the same magnets will also be driven by a more powerful generator which produces a 43 µs base half-sine current pulse of 3.8 kA. For the 'A' mode a thyristor is used as switching element inside the generator. A final third mode named 'AC dipole' will rely on the beam being excited coherently at a frequency close but outside its Eigen-frequencies by an oscillating dipole field. The beam is expected to oscillate at the exciter frequency of 3 kHz with a phase shift of π/2. The 'AC dipole' will use two 18 kW audio amplifiers capable of driving the magnets at 1 kHz(rms) around 3 kHz or between 2.7 kHz and 4 kHz. The complete system uses supervisory control implemented with Siemens PLC technology with added Siemens PROFIsafe safety feature to treat the various interlocks that have been introduced in the circuits and to assu re a safe functioning and provide 'LOCAL' and 'REMOTE' control (via CCC) of the complete installation.