ATLAS ABCD Hybrid Fatal Charge Dosage Test

The Semi-Conductor Tracker (SCT) in the ATLAS experiment at the Large Hadron Collider (LHC) could be subject to various beam loss scenarios. If a severe beam loss event were to occur, it would be beneficial to know how SCT components would be affected. In the SCT detector modules, a key component is the ABCD application specific integrated circuit (ASIC), the onboard readout electronics of the system. This ASIC has design specifications that it should withstand a 5nC charge injection within 25 ns, which is the period of the LHC bunch crossing. The first test performed is designed to test this limit, reaching a maximum of 10nC deposited in 25 ns. One model for beam loss predicts that a large charge, of the order of 10^6 MIPS, could be incident on the detector. According to detector studies, this causes a local field breakdown between the backplane of the sensor, held at 450V, and the strips. In this case the signal seen on the readout strip has a rise time of about 1μs due to a charge screening effect. A second test is designed to test this discharge scenario, with a maximum of 90nC deposited in 1μs.