C. Petrone et al.: "Magnetic measurement of the model magnet QD0 designed for the CLIC final focus beam transport line." CERN TE-MSC Internal Note, EDMS Nr: 1184196

This note presents the results of the magnetic measurements performed on QD0, model magnet for the final focus transport line for CLIC (Fig. 1). This high-gradient, hybrid quadrupole has a yoke length of 0.1 m and an aperture of 8.3 mm. ND2Fe14B Permanent magnet blocks provide a gradient of 150 T/m, which can be further increased to 530 T/m when the four coils are excited to 18.3 A. The request was to measure the strength of the field and the multipole coefficients at different currents. The measurement of the field strength, by means of the single stretched wire system, was done in December 2011 in the I8 laboratory. The measurement of the multipole was done by means of the oscillating wire system [1][2].