Function Generation and Regulation Libraries and their Application to the Control of the New Main Power Converter (POPS) at the CERN CPS

Power converter control for the LHC is based on an embedded control computer called a Function Generator/Controller (FGC). Every converter includes an FGC with responsibility for the generation of the reference current as a function of time and the regulation of the circuit current, as well as control of the converter state [1]. With many new converter controls software classes in development it was decided to generalise several key components of the FGC software in the form of C libraries: function generation in libfg, regulation, limits and simulation in libreg and DCCT, ADC and DAC calibration in libcal. These libraries were first used in the software class dedicated to controlling the new 60MW main power converter (POPS) at the CERN Proton Synchrotron (CPS) where regulation of both magnetic field and circuit current is supported. This paper reports on the functionality provided by each library and in particular libfg and libreg. The libraries are already being used by software classes in development for the next generation FGC for Linac4 converters, as well as the CERN SPS converter controls (MUGEF) and MedAustron converter regulation board.