Cargando…

Design of Corrector Magnets for PSB Injection

Two types of combined horizontal and vertical plane corrector magnets are required for PSB beam injection. The first type requires a free aperture of 150 mm × 150 mm and an integrated field strength of 0.0130 Tm, while the second type requires an aperture of 70 mm × 70 mm and an integrated field str...

Descripción completa

Detalles Bibliográficos
Autor principal: Vanherpe, L
Lenguaje:eng
Publicado: 2013
Materias:
Acceso en línea:http://cds.cern.ch/record/1626894
Descripción
Sumario:Two types of combined horizontal and vertical plane corrector magnets are required for PSB beam injection. The first type requires a free aperture of 150 mm × 150 mm and an integrated field strength of 0.0130 Tm, while the second type requires an aperture of 70 mm × 70 mm and an integrated field strength of 0.0160 Tm. In order to reduce the costs and the number of spare magnets, a common design is proposed, satisfying the most stringent requirements for both magnet types. This report summarizes the magnet design.