Accelerator Quality HTS Dipole Magnet Demonstrator designs for the EuCARD-2, 5 Tesla 40 mm Clear Aperture Magnet

Mostrar otras versiones (1)

Future high-energy accelerators will need very high magnetic fields in the range of 20 T. The EuCARD-2 work-package-10 is a collaborative push to take HTS materials into an accelerator quality demonstrator magnet. The demonstrator will produce 5 T standalone and between 17 T and 20 T, when inserted...

Descripción completa

Detalles Bibliográficos
Autores principales: Kirby, G, van Nugteren, J, Ballarino, A, Bottura, L, Chouika, N, Clement, S, Datskov, V, Fajardo, L, Fleiter, J, Gauthier, R, Lambert, L, Lopes, M, Perez, J, DeRijk, G, Rijllart, A, Rossi, L, Ten Kate, H, Durante, M, Fazilleau, P, Lorin, C, Haro, E, Stenvall, A, Caspi, S, Marchevsky, M, Goldacker, W, Kario, A
Formato: info:eu-repo/semantics/article
Lenguaje:eng
Publicado: IEEE Trans. Appl. Supercond. 2014
Materias:
Accelerators and Storage Rings
10: Future Magnets (MAG)
10.3: 5 T HTS Dipole Magnet Design and Construction
Acceso en línea:http://cds.cern.ch/record/1973329
Descripción
Sumario:Future high-energy accelerators will need very high magnetic fields in the range of 20 T. The EuCARD-2 work-package-10 is a collaborative push to take HTS materials into an accelerator quality demonstrator magnet. The demonstrator will produce 5 T standalone and between 17 T and 20 T, when inserted into the 100 mm aperture of Fresca-2 high field out-sert magnet. The HTS magnet will demonstrate the field strength and field quality that can be achieved. An effective quench detection and protection system will have to be developed to operate with the HTS superconducting materials. This paper presents a ReBCO magnet design using multi strand Roebel cable that develops a stand-alone field of 5 T in a 40 mm clear aperture and discusses the challenges associated with good field quality using this type of material. A selection of magnet designs is presented as result of a first phase of development.

Ejemplares similares