Cargando…

Study of the Minimal Distance Between Two Coils in a Cold-Mass: Milestone: MS39

Detalles Bibliográficos
Autores principales:	Ambrosio, Giorgio, Felice, Hélène, Ferracin, Paolo
Formato:	info:eu-repo/semantics/article
Lenguaje:	eng
Publicado:	2014
Materias:	Accelerators and Storage Rings 3: Magnets for Insertion Regions 3.5: Special Magnet Studies
Acceso en línea:	http://cds.cern.ch/record/1974089

Ejemplares similares

Study of Two-In-One Quadrupole for the Outer Triplet: Milestone: MS43
por: Rifflet, J M, et al.
Publicado: (2014)

REQUIREMENTS FOR SEPARATION DIPOLES: MILESTONE: MS34
por: Todesco, Ezio, et al.
Publicado: (2013)

Conceptual Design of a Crab Cavity Dogleg: Milestone: MS40
por: Todesco, Ezio
Publicado: (2014)

Study of the Supercritical He Cooling: Milestone: MS41
por: Poncet, J M, et al.
Publicado: (2014)

Study of the Superfluid He Cooling: Milestone: MS42
por: Bozza, G, et al.
Publicado: (2014)

Issues In Special Magnets Studies: Deliverable: D3.1
por: Fessia, Paolo, et al.
Publicado: (2014)

REQUIREMENTS FOR Nb$_{3}$Sn INNER TRIPLET AND COMPARISON WITH PRESENT STATE OF THE ART: MILESTONE: MS33
por: Todesco, Ezio, et al.
Publicado: (2013)

The coil completion
Publicado: (2006)

Lowering down into the ALICE pit of one of the Dipole Magnet Coils.
Publicado: (2004)

View of the 2 Dipole Magnet coils next to the Yoke assembled vertically.
Publicado: (2004)

Insertion of suspension shoulder for the coil
por: Franz leher, DWE, et al.
Publicado: (2000)

CMS superconducting solenoid model coil
por: Perrella, M
Publicado: (2000)

Cross section of the impregnated model coil
por: M.Perrella
Publicado: (2000)

Model coil extracted from impregnation mold
por: M.Perrella
Publicado: (2000)

Test of the coil bus-bar way-out
por: B. LEVESY
Publicado: (2002)

Design Studies of the Beam Separation Dipole: Deliverable: D3.3
por: Enomoto, S, et al.
Publicado: (2015)

Test to rupture of titanium tie-bars for the coil suspension.
por: Saclay
Publicado: (2000)

Arrival of Cold Box
por: L. Veillet
Publicado: (2002)

Coil cross-section Mock-up done by CEA / Saclay April 2002
por: A. PAYN
Publicado: (2002)

Cryogenic cold box during installation.
por: Goran Perinic
Publicado: (2003)

Load tests of swiveling tooling for the coil, held at CERN, point 5 on the 3rd of July, 2002.
por: Alain PAYN
Publicado: (2002)

Transfer of the cold box from SHL55 to USC55.
por: G. Perinic
Publicado: (2007)

Design Study of the Cooling: Deliverable: D3.4
por: Bozza, G, et al.
Publicado: (2015)

Arrival of the cold box for the cryogenic refrigeration plant and installation in building SHL5.
por: Goran Perinic, et al.
Publicado: (2002)

Transfer of the cold box and its ancilliaries from SHL55 to USC55.
por: G. Perinic
Publicado: (2007)

CMS Swiveling Platform for Coil and Inner Vacuum Tank Static Load Test 350 t performed at Dong Yang (South Korea) 2001-08-21 to 23
por: Alain PAYN
Publicado: (2001)

Design of the Nb$_{3}$Sn Inner Triplet: Deliverable: D3.2
por: Cavanna, E, et al.
Publicado: (2015)

Magnets for HL-LHC
por: Todesco, E
Publicado: (2014)

CONCEPTUAL DESIGN OF NB3AL AND NB-TI SEPARATION DIPOLES
por: T. Nakamoto, Q. Xu
Publicado: (2014)

The outer vactank, an object of 7.6m diameter and 13m length is built up of three cylindrical parts. The central part that is integral part of the central barrel and the the extension on either side each one 4.5m long. These extensions house the shoulders that will support and prestress the CMS Coil. To weld the extensions onto the central part a full penetration weld of 24m length and 45 mm thickness has to be done by hand from inside and outside the vacuum tank and its deformation is controled permanently.
por: Hubert Gerwig
Publicado: (2001)

ALICE Dipole Magnet foundation.
Publicado: (2004)

ALICE MAGNET L3 Fabrication of the plugs to modify the magnet's doors.
Publicado: (2003)

ALICE MAGNET L3. Fabrication of the plugs to modify the magnet's doors.
Publicado: (2003)

ALICE MAGNET L3 Detail of the plug for the magnet's doors.
Publicado: (2003)

ALICE MAGNET L3 Plugs for the magnet's door
Publicado: (2003)

ALICE MAGNET L3 Detail of the plugs installed on the magne's doors
Publicado: (2003)

The ALICE L3 Magnet
Publicado: (2005)

The ALICE L3 Magnet
por: Saba, A
Publicado: (2005)

View of the ALICE Magnet
por: Saba, A.
Publicado: (2006)

CMS Solenoid Magnet during Long Shutdown 1 (LS1)
por: Hoch, Micheal
Publicado: (2013)

Cannot write session to /tmp/vufind_sessions/sess_g1t2hjmeadelk767g53h877j8n