Cargando…

Timepix3 performance in power pulsing operation

The physics aims at the proposed CLIC linear $\mathrm{e^+e^-}$ collider impose challenging requirements on the performance of the detector system. In particular for the vertex detector the principal challenge is building an ultra-low mass ($\sim$0.2% X$_0$ per layer) detector that can provide a sing...

Descripción completa

Detalles Bibliográficos
Autor principal: Perez Codina, Estel
Lenguaje:eng
Publicado: 2019
Materias:
Acceso en línea:https://dx.doi.org/10.22323/1.348.0059
http://cds.cern.ch/record/2665318
Descripción
Sumario:The physics aims at the proposed CLIC linear $\mathrm{e^+e^-}$ collider impose challenging requirements on the performance of the detector system. In particular for the vertex detector the principal challenge is building an ultra-low mass ($\sim$0.2% X$_0$ per layer) detector that can provide a single point resolution of a few micrometers as well as 10ns time slicing capabilities. To reach such low material budget, CLIC uses an air-flow cooling system in the inner vertex region. This requires very low power dissipation, which is achieved by exploiting CLIC’s low duty cycle ($\sim < $0.001%) and beam structure, allowing pulsed power operation of the pixel detector. Timepix3 includes power pulsing features, such as, in the analog domain, allowing to switch dynamically between nominal power and shutdown modes, and, in the digital domain, gating the clock of the pixel matrix. This contribution reports the performance of the Timepix3 chip in pulsed power operation, in terms of power saving, detection efficiency and noise performance. Measurements were performed in beam tests taking as reference tracks provided by a telescope, as well as in the laboratory using a radioactive source.