Cargando…

Investigations Into X-Band Dielectric Assist Accelerating Structures for Future Linear Accelerators

Dielectric assist accelerating (DAA) structures are being studied as an alternative to conventional disk-loaded copper structures. This article investigates numerically an efficient <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/x...

Descripción completa

Detalles Bibliográficos
Autores principales: Wei, Yelong, Grudiev, Alexej
Lenguaje:eng
Publicado: 2020
Materias:
Acceso en línea:https://dx.doi.org/10.1109/TNS.2021.3069110
http://cds.cern.ch/record/2723691
_version_ 1780965950139400192
author Wei, Yelong
Grudiev, Alexej
author_facet Wei, Yelong
Grudiev, Alexej
author_sort Wei, Yelong
collection CERN
description Dielectric assist accelerating (DAA) structures are being studied as an alternative to conventional disk-loaded copper structures. This article investigates numerically an efficient <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$X$ </tex-math></inline-formula>-band DAA structure operating in a higher order mode of TM<sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">02</sub>-<inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\pi $ </tex-math></inline-formula>. This accelerating structure consists of dielectric disks with irises arranged periodically in a metallic enclosure. Through optimizations, the radio frequency (RF) power loss on the metallic wall can be significantly reduced, resulting in an extremely high quality factor <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$Q_{0}=134\,525$ </tex-math></inline-formula>and a very high shunt impedance <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$r'=781\,\,\text{M}\Omega $ </tex-math></inline-formula>/m. The RF-to-beam power efficiency reaches 51% which is significantly higher than previously-reported Compact Linear Collider (CLIC)-G structures with an efficiency of only 33.5%. The optimum geometry of the regular and the end cells is described in detail. Due to the wide bandwidth from the dispersion relation of the accelerating mode, the DAA structure is allowed to have a maximum number of 72 regular cells with a frequency separation of 1.0 MHz, which is superior to that of conventional disk-loaded copper structures. In addition, the DAA structure is found to have a short-range transverse wakefield lower than that of the CLIC-G structure.
id cern-2723691
institution Organización Europea para la Investigación Nuclear
language eng
publishDate 2020
record_format invenio
spelling cern-27236912021-07-24T02:34:21Zdoi:10.1109/TNS.2021.3069110http://cds.cern.ch/record/2723691engWei, YelongGrudiev, AlexejInvestigations Into X-Band Dielectric Assist Accelerating Structures for Future Linear Acceleratorsphysics.acc-phAccelerators and Storage RingsDielectric assist accelerating (DAA) structures are being studied as an alternative to conventional disk-loaded copper structures. This article investigates numerically an efficient <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$X$ </tex-math></inline-formula>-band DAA structure operating in a higher order mode of TM<sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">02</sub>-<inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\pi $ </tex-math></inline-formula>. This accelerating structure consists of dielectric disks with irises arranged periodically in a metallic enclosure. Through optimizations, the radio frequency (RF) power loss on the metallic wall can be significantly reduced, resulting in an extremely high quality factor <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$Q_{0}=134\,525$ </tex-math></inline-formula>and a very high shunt impedance <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$r'=781\,\,\text{M}\Omega $ </tex-math></inline-formula>/m. The RF-to-beam power efficiency reaches 51% which is significantly higher than previously-reported Compact Linear Collider (CLIC)-G structures with an efficiency of only 33.5%. The optimum geometry of the regular and the end cells is described in detail. Due to the wide bandwidth from the dispersion relation of the accelerating mode, the DAA structure is allowed to have a maximum number of 72 regular cells with a frequency separation of 1.0 MHz, which is superior to that of conventional disk-loaded copper structures. In addition, the DAA structure is found to have a short-range transverse wakefield lower than that of the CLIC-G structure.Dielectric disk accelerating (DDA) structures are being studied as an alternative to conventional disk-loaded copper structures. This paper investigates numerically an efficient X-band DDA structure operating at a higher order mode of TM02-π. This accelerating structure consists of dielectric disks with irises arranged periodically in a metallic enclosure. Through optimizations, the RF power loss on the metallic wall can be significantly reduced, resulting in an extremely high quality factor Q_0=111064 and a very high shunt impedance R_shunt=605 MΩ/m. The RF-to-beam power efficiency reaches 46.6% which is significantly higher than previously-reported CLIC-G structures with an efficiency of only 28.5%. The optimum geometry of the regular and the end cells is described in detail. Due to the wide bandwidth from the dispersion relation of the accelerating mode, the DDA structure is allowed to have a maximum number of 73 regular cells with a frequency separation of 1.0 MHz, which is superior to that of conventional RF accelerating structures. In addition, the DDA structure is found to have a short-range transverse wakefield lower than that of the CLIC-G structure.arXiv:2006.07276oai:cds.cern.ch:27236912020-06-12
spellingShingle physics.acc-ph
Accelerators and Storage Rings
Wei, Yelong
Grudiev, Alexej
Investigations Into X-Band Dielectric Assist Accelerating Structures for Future Linear Accelerators
title Investigations Into X-Band Dielectric Assist Accelerating Structures for Future Linear Accelerators
title_full Investigations Into X-Band Dielectric Assist Accelerating Structures for Future Linear Accelerators
title_fullStr Investigations Into X-Band Dielectric Assist Accelerating Structures for Future Linear Accelerators
title_full_unstemmed Investigations Into X-Band Dielectric Assist Accelerating Structures for Future Linear Accelerators
title_short Investigations Into X-Band Dielectric Assist Accelerating Structures for Future Linear Accelerators
title_sort investigations into x-band dielectric assist accelerating structures for future linear accelerators
topic physics.acc-ph
Accelerators and Storage Rings
url https://dx.doi.org/10.1109/TNS.2021.3069110
http://cds.cern.ch/record/2723691
work_keys_str_mv AT weiyelong investigationsintoxbanddielectricassistacceleratingstructuresforfuturelinearaccelerators
AT grudievalexej investigationsintoxbanddielectricassistacceleratingstructuresforfuturelinearaccelerators