Beam Test Studies with Silicon Sensor Module Prototype for the CMS Phase-2 Outer Tracker

The Large Hadron Collider (LHC) at CERN will be upgraded to the High-Luminosity LHC (HL-LHC) by 2029. In order to fully exploit the physics potential of the high luminosity era the experiments must undergo major upgrades. In the context of the upgrade of the Compact Muon Solenoid (CMS) experiment the silicon tracker will be fully replaced. The outer part of the new tracker (Outer Tracker) will be equipped with about 13'000 double-layer silicon sensor modules with two different flavours: PS modules consisting of a macro-pixel and a strip sensor and 2S modules using two strip sensors. These modules can discriminate between trajectories of charged particles with low and high transverse momentum. The different curvature of the trajectories in the CMS magnetic field leads to different hit signatures in the two sensor layers. By reading out both sensors, matching hits in the seed and correlation layer "stubs" are identified. This stub information is generated at the LHC bunch crossing frequency of 40 MHz and serves as input for the first stage of the CMS trigger. In order to quantify the hit and stub detection efficiency, beam tests have been performed. This article comprises selected studies from measurements gathered during two beam tests at the DESY test beam facility with 2S prototype modules assembled in 2021, featuring the Low Power Gigabit Transceiver (lpGBT). In order to compare the module performance at the beginning and end of the CMS runtime, a module with irradiated components has been built and intensively tested.