A New Beam Loading Compensation and Blowup Control System Using Multi-Harmonic Digital Feedback Loops in the CERN Proton Synchrotron Booster

As part of the LHC Injectors Upgrade, the CERN Proton Synchrotron Booster (PSB) has been upgraded with new wide-band Finemet cavities and a renovated Low-Level Radio Frequency system with digital cavity controllers implemented in FPGAs. Each controller synchronously receives the computed revolution frequency, used to generate 16 harmonic references. These are then used to IQ demodulate the voltage gap and modulate the 16 RF drive signals each controlled through a Cartesian feedback loop (with individual voltage and phase control). The sum of these digital drive signals is then sent to the cavities. In addition, a configurable blow-up system providing a sinusoidal or custom noise pattern can be used to excite the beam. An embedded network analyzer allows studying the stability of the feedback loops of the individual harmonics. The 16 harmonic feedback loops have been successfully operated during 2021, allowing to reduce the beam induced voltage and control the longitudinal emittance of the beam. In this paper we present the system architecture as well as the performance of the complete cavity controller during operation in the PSB.