Cargando…

Manufacture of 195 mm and 250 mm diameter finish machined vacuum flanges for the PS machine

Detalles Bibliográficos
Lenguaje:	eng
Publicado:	1985
Materias:	Accelerators and Storage Rings
Acceso en línea:	http://cds.cern.ch/record/2871133

Ejemplares similares

Technical specification for the supply of 195 mm and 250 mm diameter vacuum flange blanks for the PS machine
Publicado: (1985)

Longitudinal impedance of the 100 mm diameter vacuum valve in EPA
por: Caspers, F, et al.
Publicado: (1986)

Technical specification - Manufacture of sealing gaskets for the manifold pick-up flanges of the PS machine
Publicado: (1986)

Technical specification - Manufacture of sealing gaskets for the manifold pick-up flanges of the PS machine
Publicado: (1986)

Enamelling of standard and enlarged size conical flanges for the PS machine
Publicado: (1985)

Technical specification - Manufacture of the supports for the vacuum chamber of the PS machine
Publicado: (1986)

Vacuum techniques for the range {$ {10^{-8}mm}$} Hg to {$ {10^{-10}mm}$} Hg
por: Day, E A, et al.
Publicado: (1957)

Reduction of the Impedance Created by the Insulated Vacuum Flanges in the PS Booster
por: Blas, A, et al.
Publicado: (2000)

Longitudinal coupling impedances at insulated PS vacuum chamber flanges
por: Faltens, A, et al.
Publicado: (1974)

Reduction of the impedance created by the insulated vacuum flanges in the PS Booster
por: Blas, A, et al.
Publicado: (2000)

Longitudinal coupling impedances at insulated PS vacuum chamber flanges
por: Faltens, A, et al.
Publicado: (1974)

Technical specification enamelling of standard and enlarged size conical flanges for the PS machine
Publicado: (1985)

Results of the inspection of the two prototype enamelled flanges for the new PS vacuum system
por: Whitfield, C
Publicado: (1986)

Results of the inspection of the two prototype enamelled flanges for the new PS vacuum system
por: Whitfield, C
Publicado: (1986)

Additional specifications for the manufacture of standard and enlarged size vacuum chambers and manifolds for the PS machine
Publicado: (1986)

How Well Can We Collect Antiprotons with a Big Horn(60mm in Diameter) and a Small Lithium Lens(20mm in Diameter) in the ACOL Dogleg?
por: Maury, S
Publicado: (1985)

How well can we collect antiprotons with a big horn (60 MM in diameter) and a small lithium lens (20 MM in diameter) in the ACOL dogleg ?
por: Maury, S
Publicado: (1985)

Specification technique for ultra-high vacuum flanges
por: Wahl, H
Publicado: (1985)

Beam coupling impedances of the Booster vacuum flanges
por: Schneider, G C
Publicado: (1989)

Beam coupling impedances of the booster vacuum flanges
por: Schneider, G C
Publicado: (1989)

Study of a 36 mm and 34 mm lithium lens
por: Maury, S
Publicado: (1990)

Technical specification for the machining of waveguide flanges and gasket centring parts
Publicado: (1991)

Technical specification for the machining of waveguide flanges and gasket centring parts
Publicado: (1989)

Longitudinal Impedance Characterization of the CERN SPS Vacuum Flanges
por: Campelo, Jose Enrique
Publicado: (2015)

RF bypass on the proton synchrotron vacuum chamber flanges
por: Cappi, R
Publicado: (1989)

Automatically and remotely welded and removable weld flange vacuum joint
por: Voss, J M
Publicado: (1967)

Vacuum flanges for the CERN 400 GeV proton accelerator
por: Wahl, H
Publicado: (1977)

Technical specification for supply of ∅140 and ∅150 mm bellows (For subsequent incorporation into quadrupole vacuum vessels)
Publicado: (1984)

Automatic control of vacuum sector valves for protection of the PS machine vacuum system and accelerator cavities
por: Unser, K
Publicado: (1961)

Dimensional Measurements of 30 mm Diameter Aluminium Tubes with 250 mum Thick Walls
por: Guyot, C, et al.
Publicado: (1994)

A simulation programme for the study of non-linear longitudinal instabilities, and its application to estimate the influence of the flanges of the PS vacuum chamber
por: Jacobs, NJD
Publicado: (1974)

Technical specification for the supply of vacuum flanges for the CERN antiproton collector (ACOL)
Publicado: (1984)

Safety instructions for experiments PS195
por: Danloy, L, et al.
Publicado: (1991)

The 90-mm Period Undulator for SRRC
por: Quimby, D C, et al.
Publicado: (1999)

Characterization of Shielding for the CERN-SPS Vacuum Flanges With Respect to Beam Coupling Impedance
por: Kaltenbacher, Thomas, et al.
Publicado: (2017)

The influence of the mechanical properties of gasket materials on the reliability of bakeable ultrahigh vacuum flanges
por: Unterlerchner, W
Publicado: (1977)

Technical specification vacuum flanges for the CERN 400 GeV proton accelerator
por: Wahl, H
Publicado: (1978)

Technical requirements vacuum flanges for the CERN 400 GeV proton accelerator
por: CERN. Geneva
Publicado: (1979)

LEAR ultra high vacuum Con-flat and Wheeler type flange specifications
por: Riboni, P
Publicado: (1980)

Technical specifications - Stainless steel flanges for the antiproton accumulator ring vacuum system
Publicado: (1978)

Cannot write session to /tmp/vufind_sessions/sess_3q06mhmt7dgtkruphiluseatng