Large Area Picosecond Photodetector for the Upgrade II of the LHCb RICH

The Large Area Picosecond Photodetector (LAPPD) is a new generation microchannel plate (MCP) photodetector that is currently capturing the attention of detector physicists thanks to its excellent timing resolution, high gain and low dark count rate. It consists of a photocathode that responds to a single photon by producing a photoelectron that enters a pair of microchannel plates, where it is multiplied to a million electrons in a fast-rising pulse that is easily detected. The speed of this process provides the time resolution essential for high intensity environments such as the high luminosity Large Hadron Collider (LHC) at the CERN laboratory. The LAPPD has a large sensitive area, 200 × 200 mm 2, which reduces the number of sensors that are needed. The increased particle collision rate in the future LHC-HL phase represents a great challenge for the Ring Imaging Cherenkov (RICH) photodetectors in the LHCb experiment. The LHCb collaboration is working for the Upgrade II that will take place during the Long Shutdown 4 of the LHC (>2032). The LAPPD produced and commercialised by INCOM (US) represents one of the possible alternatives for the future RICH photodetectors, thanks to its good time resolution, low dark noise rate and high gain. The LHCb Edinburgh group is involved in the Upgrade II R&D programme, testing and characterising an LAPPD in the laboratory of the University. The LAPPD technology, the current Edinburgh setup and performance from first tests of the photodetector will be presented.