Cargando…

Measurements on a FET based 1 MHz, 10 kV pulse generator

Detalles Bibliográficos
Autores principales:	Wait, G D, Barnes, M J
Lenguaje:	eng
Publicado:	1995
Materias:	Accelerators and Storage Rings
Acceso en línea:	http://cds.cern.ch/record/291728

Ejemplares similares

Design for a FET based 1 MHz, 10 kV pulse generator
por: Barnes, M J, et al.
Publicado: (1995)

A FET based frequency and duty factor agile 6 kV pulse generator
por: Barnes, M J, et al.
Publicado: (1994)

CIAE 600 kV ns pulse neutron generator
por: Shen Guan Ren, et al.
Publicado: (2001)

A nanosecond pulse generator of 200 kV amplitude
por: Gygi, Edmond, et al.
Publicado: (1964)

Symposium on CIAE 600 kV ns pulse neutron generator
por: Shen Guan Ren
Publicado: (2001)

A 4 nsec, 100 kV square pulse generator
por: Gygi, Edmond, et al.
Publicado: (1971)

A 12 kV, 1 kHz, Pulse Generator for Breakdown Studies of Samples for CLIC RF Accelerating Structures
por: Soares, R H, et al.
Publicado: (2012)

Construction and 60 kV tests of the prototype pulser for the LHC injection kicker system
por: Barnes, M J, et al.
Publicado: (1999)

Results for the 150 kW prototype 1 MHz chopper at 100% duty cycle
por: Wait, G D, et al.
Publicado: (1992)

A fast 60 kV resonant charging power supply for the LHC inflectors
por: Barnes, M J, et al.
Publicado: (1998)

A Solid State 100 kV Long Pulse Generator for Klystrons Power Supply
por: Martins, C A, et al.
Publicado: (2010)

Results of Start of the 150 kV Magnetic Pulse Compressor
por: Krylov, S A, et al.
Publicado: (1999)

Operation Modes of the Fast 60 kV Resonant Charging Power Supply for the LHC Inflectors
por: Barnes, M J, et al.
Publicado: (1997)

Pulse width control at 10$^{6}$ pulses/sec and 15 kV for the KAON factory beam chopper
por: Wait, G D, et al.
Publicado: (1993)

Technical Specification: For pulsed power cable - 2 kV r.m.s.
Publicado: (1985)

An alternative design concept for a 1 MHz beam chopper for the KAON factory
por: Wait, G D, et al.
Publicado: (1992)

High power semiconductor switches in the 12 kV, 50 kA pulse generator of the SPS beam dump kicker system
por: Bonthond, J, et al.
Publicado: (2001)

Mathematical modelling of the 1 MHz beam chopper for the KAON factory
por: Barnes, M J, et al.
Publicado: (1990)

Controls and interlocks for a prototype 1 MHz beam chopper
por: Waters, G, et al.
Publicado: (1991)

Prototype studies of a 1 MHz beam chopper for the KAON factory
por: Wait, G D, et al.
Publicado: (1990)

The 12 kV, 50 kA Pulse Generator for the SPS MKDH Horizontal Beam Dump Kicker System,equipped with Semiconductor Switches
por: Bonthond, J, et al.
Publicado: (2001)

Measurements on a 12.5 kV Prototype Inductive Adder for the CLIC DR Extraction Kickers
por: Holma, Janne, et al.
Publicado: (2017)

Nouveau linac : 1 KV-1A pulse generator
por: Cuperus, J
Publicado: (1978)

Specification technique pour armoires 600 kV/300 kV (version toute transistorisée)
Publicado: (1980)

Differentiating measuring coils for pulsed currents in the MA/MHz range
por: Boggasch, Ekkehard, et al.
Publicado: (1986)

Differentiating measuring coils for pulsed currents in the MA/MHz range
por: Boggasch, E, et al.
Publicado: (1986)

A 1 MHz beam chopper for the KAON factory
por: Wait, G D, et al.
Publicado: (1990)

Measurements on a 20-layer 12.5 kV prototype inductive adder for the CLIC DR kickers
por: Holma, J, et al.
Publicado: (2018)

Design and initial measurements of a 12.5 kV prototype inductive adder for CLIC DR kickers
por: Holma, Janne, et al.
Publicado: (2016)

Inductance Calculations and Measurements for the CERN LHC Injection Pulse Forming Network
por: Barnes, M J, et al.
Publicado: (2000)

Pulse repeater with max. prf of 1 MHz
por: MeIman, P
Publicado: (1972)

Beam-based measurements on two ±12.5 kV inductive adders, together with striplines, for CLIC damping ring extraction kickers
por: Holma, Janne, et al.
Publicado: (2019)

3 kW, 0.1–35 MHz pulsed amplifier PS-RF/HC3289
por: Paoluzzi, M
Publicado: (2001)

Laboratory measurements on two ±12.5 kV inductive adders with ±0.02% waveform stability for CLIC damping ring extraction kickers
por: Holma, Janne, et al.
Publicado: (2019)

10,7 MHz AVC amplificateur
por: Barthelémy, R
Publicado: (1995)

The novel 4kV, 40 kA capacitor discharge power converters for the pulsed septum magnets in the PS straight sections 16 and 58
por: Ducastel, C, et al.
Publicado: (1988)

A 60kV modulator for electrostatic lens excitation
por: Fowler, A, et al.
Publicado: (1998)

Oil-filled transformer for 5 kV charging supply
por: Pirkl, W
Publicado: (1974)

"300 kV power supplies": Not distributed - remained DRAFT
por: Kamber, I
Publicado: (1982)

Measurements on a 12.5/17.5 kV Inductive Adder with Extremely High Stability for the Damping Ring Kickers of the Compact Linear Collider at CERN
por: Holma, Janne, et al.
Publicado: (2019)

Cannot write session to /tmp/vufind_sessions/sess_m5u7gs402o8a0mlpq96r9pa521