The short straight sections for the LHC

During more than five years a close collaboration between CERN and CEA-Saclay led to the development and construction of two prototype quadrupole magnets and the integration of one of them into the short straight section of the LHC half-cell test string at CERN. In the frame of the special host country contribution to the LHC project this collaboration has been extended to the CNRS laboratory in Orsay and covers besides the quadrupole magnets the complete cold mass assembly (CEA) and the integration into the short straight section cryostat (CNRS). The short straight sections include not only the main lattice quadrupoles with their protection diodes, they also house different corrector magnets and the beam position monitors. Further, they provide the cryogenic feed units for a half-cell with all the magnet interconnections and the jumper connection to the separate cryo-line. The paper will show the general lay-out of these complex units and elaborate the different aspects of their assembly.