The new control system of the SPS target sector

The SPS, the Super Proton Synchrotron at CERN, is an accelerator originally designed and commissioned in 1976 for protons. The control system of the SPS target stations, beam absorbers and other aperture limiting devices was developed in the seventies. It was mainly based on home made electronics and equipment dependent software. With time, this electronics has become obsolete, difficult to maintain in operation and not suitable for integration into a modern control system. In 1997, a project was set up to modernise the electronics and the related software. The new control system is largely based on standard industrial hardware and software components. SIEMENS Simatic S7-300 programmable logic controllers have been used as equipment controllers and connected through PROFIBUS to a Windows-NT front-end PC running the SIEMENS WinCC SCADA package which acts as local controller and remote access gateway. This fully industrial solution has been successfully integrated into the actual SPS accelerator control infrastructure and is open to other industrial communication protocols. The design, development and realisation of the selected solution have been outsourced to industry.