Chimney piping mock-up

Ejemplares similares

• Tie-Rods Mock-up
  por: CEA/ Saclay
  Publicado: (2000)
• Coil cross-section Mock-up done by CEA / Saclay April 2002
  por: A. PAYN
  Publicado: (2002)
• Conductor way-out Mock-up. September 2001 First trial of bending. Tensile Stress 120 Kg
  por: Alain PAYN
  Publicado: (2001)
• Test to rupture of titanium tie-bars for the coil suspension.
  por: Saclay
  Publicado: (2000)
• The outer vactank, an object of 7.6m diameter and 13m length is built up of three cylindrical parts. The central part that is integral part of the central barrel and the the extension on either side each one 4.5m long. These extensions house the shoulders that will support and prestress the CMS Coil. To weld the extensions onto the central part a full penetration weld of 24m length and 45 mm thickness has to be done by hand from inside and outside the vacuum tank and its deformation is controled permanently.
  por: Hubert Gerwig
  Publicado: (2001)