HF wedge #1" detail of the wedge tip taken at VNIITF in the construction workshop. The jig mounted on top is used to measure the conformity to the drawings.

The photo has been taken as documetation of the acceptance procedure of the first wedge for the very forward calorimeter of CMS (HF). The detail shows the holes where the quartz fibres are going to be stuffed and the jig used to measure that the geometry was within the specified tolerances and that...

Descripción completa

Detalles Bibliográficos
Autor principal: Official photographer of VNIITF (photo scanned by T. Camporesi)
Publicado: 2001
Materias:
Hadronic Calorimeter
Acceso en línea:http://cds.cern.ch/record/42467
Descripción
Sumario:The photo has been taken as documetation of the acceptance procedure of the first wedge for the very forward calorimeter of CMS (HF). The detail shows the holes where the quartz fibres are going to be stuffed and the jig used to measure that the geometry was within the specified tolerances and that the geometry alignement track was conforming to the specifications.

Ejemplares similares