Cargando…

Coil cross-section Mock-up done by CEA / Saclay April 2002

Coil cross-section Mock-up done by CEA / Saclay April 2002

Detalles Bibliográficos
Autor principal:	A. PAYN
Lenguaje:	ENG
Publicado:	2002
Materias:	Magnet
Acceso en línea:	http://cds.cern.ch/record/42973

Ejemplares similares

Load tests of swiveling tooling for the coil, held at CERN, point 5 on the 3rd of July, 2002.
por: Alain PAYN
Publicado: (2002)

Conductor way-out Mock-up. September 2001 First trial of bending. Tensile Stress 120 Kg
por: Alain PAYN
Publicado: (2001)

Chimney piping mock-up
por: CEA Saclay
Publicado: (2000)

Tie-Rods Mock-up
por: CEA/ Saclay
Publicado: (2000)

Some tests systems in Saclay
por: F. Kircher
Publicado: (2002)

Production of Swiveling platform - Korea Visit during first stage of production 25th of April, 2001
por: A. PAYN, et al.
Publicado: (2001)

CMS Swiveling Platform for Coil and Inner Vacuum Tank Static Load Test 350 t performed at Dong Yang (South Korea) 2001-08-21 to 23
por: Alain PAYN
Publicado: (2001)

Cross section of the impregnated model coil
por: M.Perrella
Publicado: (2000)

CMS delegation for MTB55 held at Tata Institute in Mumbai (Bombay) during CMS week 14 December 2000.
por: A. Payn
Publicado: (2000)

Production of Swiveling Platform in Korea - Visit during Machining - 12th/14th of June, 2001
por: Alain PAYN
Publicado: (2001)

Situation of winding end of August 2002
por: Ansaldo
Publicado: (2002)

End of cabling campaign at Brugg Kabelwerk in November 2002
por: Bertrand Blau
Publicado: (2002)

The coil completion
Publicado: (2006)

Test of the coil bus-bar way-out
por: B. LEVESY
Publicado: (2002)

View of SX5 on 25/7/2002 before closure.
por: Brice maximilien
Publicado: (2002)

Situation of mandrel manufacture (CB-1 & CB0) end of November 2002
por: Ansaldo
Publicado: (2002)

Insertion of suspension shoulder for the coil
por: Franz leher, DWE, et al.
Publicado: (2000)

Picture of cabling operation, taken at Brugg Kabelwerk during the last campaign in November 2002
por: B. Blau
Publicado: (2002)

View of SX hall beginning of March 2002.
por: Lucien Veillet
Publicado: (2002)

CMS superconducting solenoid model coil
por: Perrella, M
Publicado: (2000)

W7-X DEMO coil cryogenic tests in the CEA/Saclay Test Facility
por: Schild, T, et al.
Publicado: (2002)

Manufacturing of the EuCARD2 Roebel-Based Cos-Theta Coils at CEA Saclay
por: Durante, Maria, et al.
Publicado: (2020)

Situation on 15 May 2002, mandrel CB-2 et CB-1, prototype & impregnation chamber
por: Ansaldo
Publicado: (2002)

Model coil extracted from impregnation mold
por: M.Perrella
Publicado: (2000)

CEA-Saclay Tuners Ready for Tests
por: Bosland, P, et al.
Publicado: (2006)

Test to rupture of titanium tie-bars for the coil suspension.
por: Saclay
Publicado: (2000)

Cross section of Outokumpu strand
por: Outokumpu
Publicado: (2000)

The outer vactank, an object of 7.6m diameter and 13m length is built up of three cylindrical parts. The central part that is integral part of the central barrel and the the extension on either side each one 4.5m long. These extensions house the shoulders that will support and prestress the CMS Coil. To weld the extensions onto the central part a full penetration weld of 24m length and 45 mm thickness has to be done by hand from inside and outside the vacuum tank and its deformation is controled permanently.
por: Hubert Gerwig
Publicado: (2001)

Full cross section of CMS conductor
por: Stefano Sgobba
Publicado: (2001)

Into the heart of matter: 50 years of research at CEA Saclay
por: Lefebvre, Véronique
Publicado: (2002)

Nb$_{3}$Sn quadrupole development at CEA/Saclay
por: Rifflet, J M, et al.
Publicado: (2009)

Superconducting quadrupoles for LHC : CERN/CEA-CEN Saclay Collaboration
Publicado: (2020)

Single cell electro-polishing at CEA Saclay: first results
por: ozénou, F, et al.
Publicado: (2007)

Saclay: ALEPH coil hits the road
Publicado: (1987)

Florent Staleyl (CEA Saclay), project leader of the ALICE Moun spectrometer
por: Saba, A.
Publicado: (2007)

1 MW - 704 MHz RF test stand at CEA-Saclay
por: Chel, S, et al.
Publicado: (2007)

Herve Borel (CEA Saclay), responsible for the tracking chambers of the ALICE Moun spectrometer
por: Saba, A.
Publicado: (2007)

First bending test at TPA using full section dummy conductor
por: P. Fabbricatore
Publicado: (2001)

Test Results of the Third LHC Main Quadrupole Magnet Prototype at CEA/Saclay
por: Derégel, J, et al.
Publicado: (2002)

Results of the CEA/Saclay H electron cyclotron resonance ion source, ECRIN
por: Tuske, O, et al.
Publicado: (2006)

Cannot write session to /tmp/vufind_sessions/sess_ncdcnj04uu9spkngsfhdahkrfo