Analysis of parameters affecting beam gauge performance

Beam gauges have been used in the last decade or so for measuring the internal azimuthal compressive coil stresses in superconducting magnets. In early model Large Hadron Collider Interaction Region (LHC IR) quadrupoles tested at Fermilab, the beam gauges indicated excessively high amounts of inner and outer coil prestress during the collaring process, inconsistent with the coil size and modulus data. In response to these measurements, a simple mechanics based quantitative understanding of different factors affecting beam gauges has been developed. A finite element model with contact elements and non-linear material behavior, confirmed with experimental results, was developed. The results indicate that a small plastic deformation of either the beam or the backing plate can cause significant errors in the measured stress values. The effect of variations in coil modulus and support boundary conditions on beam gauge performance are also discussed. (3 refs).