Performance of a large forward resistive plate chamber for the CMS /LHC under high radiation environment

We present the first beam test results of a real size prototype RPC for the endcap region of the CMS, one of large detectors at CERN LHC. The chamber was built with relatively low resistivity bakelite made in Korea and was operated successfully at the Gamma Irradiation Facility at CERN under the hig...

Descripción completa

Detalles Bibliográficos
Autores principales: Ahn, S H, Amirikas, R, Bahk, S Y, Hong, B, Hong, S J, Kim, K H, Kim, Y J, Kim, Y U, Koo, D G, Lee, K S, Lee, S J, Nam, S K, Park, S, Rhee, J T, Seo, S W, Sim, K S
Lenguaje:eng
Publicado: 2001
Materias:
Detectors and Experimental Techniques
Acceso en línea:https://dx.doi.org/10.1016/S0168-9002(01)00778-1
http://cds.cern.ch/record/560407
Descripción
Sumario:We present the first beam test results of a real size prototype RPC for the endcap region of the CMS, one of large detectors at CERN LHC. The chamber was built with relatively low resistivity bakelite made in Korea and was operated successfully at the Gamma Irradiation Facility at CERN under the highest photon flux available, which corresponds to an effective cluster rate up to about 800 Hz/cm/sup 2 /. The cross-talk effects between strips and sectors have been studied extensively. The high voltage plateau, which satisfies the CMS requirements for efficiency and the number of strips fired per cluster, extends to at least 300 V. The time resolution has been measured to be better than 1.3 ns in this HV plateau region. These results demonstrate that the current design of the device can be used as a muon trigger detector for the CMS forward region. (13 refs).

Ejemplares similares