Cargando…

Alternating magnetic field losses in ATLAS type aluminium stabilized NbTi superconductors

During ramping up- and down of the current in large-scale magnets the ramp losses are an important factor affecting the thermal and electro-magnetic stability of the system. The calculation of the losses is not straightforward due to the large dimensions of the conductor (~600 mm/sup 2/) implying th...

Descripción completa

Detalles Bibliográficos
Autores principales:	Boxman, E W, Nijhuis, A, ten Kate, H H J
Lenguaje:	eng
Publicado:	2002
Materias:	Detectors and Experimental Techniques
Acceso en línea:	http://cds.cern.ch/record/596700

Ejemplares similares

Evaluation of APC NbTi superconductor in a model dipole magnet
por: Scanlan, R M, et al.
Publicado: (1993)

(NbTi)N and NbTi coatings for superconducting accelerating cavities
por: Benvenuti, Cristoforo, et al.
Publicado: (1992)

Direct Measurement of Inter-Filament Resistance in Superconducting Multifilamentary NbTi and Nb(3)Sn Strands
por: Zhou, C, et al.
Publicado: (2011)

Stability in a long length NbTi CICC
por: Bottura, L, et al.
Publicado: (2001)

Comparing Thermal Stability of NbTi and Nb$_3$Sn Wires
por: Breschi, M, et al.
Publicado: (2008)

Magnetization and loss measurements on Nb$_{3}$Sn and NbTi strands for ITER and LHC
por: Foitl, M
Publicado: (2001)

A survey of NbTi conductor status
por: Billinge, R, et al.
Publicado: (1985)

A SURVEY OF NbTi CONDUCTOR STATUS
por: Billinge, R, et al.
Publicado: (1985)

Production and qualification of 40 km of Al-stabilized NbTi cable for the ATLAS experiment at CERN
por: Baccaglioni, G, et al.
Publicado: (2002)

Differences in shielding versus trapping behaviour of dynamically stabilized NbTi cylinders
por: Häbel, E, et al.
Publicado: (1977)

Nioboaeschynite-(Ce), Ce(NbTi)O(6)
por: Morrison, Shaunna M., et al.
Publicado: (2012)

A Practical Fit for the Critical Surface of NbTi
por: Bottura, L
Publicado: (1999)

Experimental and numerical analysis of interfilament resistances in NbTi strands
por: Breschi, M, et al.
Publicado: (2014)

NbTi Superferric Corrector Magnets for the LHC Luminosity Upgrade
por: Volpini, G, et al.
Publicado: (2014)

Current diffusion and normal zone propagation inside the aluminum stabilized superconductor of ATLAS model coil
por: Boxman, E W, et al.
Publicado: (2003)

NbTi/Nb/Cu multilayer shield for the superconducting shield (SuShi) septum
por: Barna, D., et al.
Publicado: (2018)

Critical Current Test Facilities for LHC Superconducting NbTi Cable Strands
por: Boutboul, T, et al.
Publicado: (2001)

A 5 m long impregnated NbTi dipole magnet
por: Leroy, D, et al.
Publicado: (1985)

Low-current Resistance of Multifilamentary Superconducting Cu/NbTi Strands
por: Boutboul, T, et al.
Publicado: (2003)

Are Large-Aperture NbTi Magnets Compatible with 1e35?
por: Wildner, E, et al.
Publicado: (2008)

Technical specification of NbTi superconducting wires for the sextupolar correction models
Publicado: (1988)

Vortex dynamics in NbTi films at high frequency and high DC magnetic fields
por: Ghigo, Gianluca, et al.
Publicado: (2023)

Fabrication of an aluminium stabilized superconductor
por: Morpurgo, Mario, et al.
Publicado: (1977)

Minimum Quench Energy and Early Quench Development in NbTi Superconducting Strands
por: Breschi, M, et al.
Publicado: (2007)

Evaluation of the effects of mechanical cycles on bonding of Al-superconducting cable in high-performance stabilized NbTi conductor
por: Curreli, Sebi, et al.
Publicado: (2016)

Test up to 80 kA of an Al-Stabilized NbTi Cable With the Upgraded Saclay Superconducting Transformer
por: Berriaud, C, et al.
Publicado: (2014)

Residual Resistivity Ratio (RRR) Measurements of LHC Superconducting NbTi Cable Strands
por: Charifoulline, Z
Publicado: (2006)

Production and characterisation of (NbTi)N thin films for applications to RF superconducting accelerating cavities
por: Marino, M
Publicado: (1999)

Test Results of the MQYYM: A 90 Mm NbTi Quadrupole Magnet Option for HL-LHC
por: Simon, D, et al.
Publicado: (2022)

Development of MQYY: A 90-mm NbTi Double Aperture Quadrupole Magnet for HL-LHC
por: Felice, Helene, et al.
Publicado: (2018)

Fabrication and test of a LHC NbTi dipole model magnet with a split collar system,
por: Zerobin, F, et al.
Publicado: (1992)

Effects of cold-treatment and strain-rate on mechanical properties of NbTi/Cu superconducting composite wires
por: Guan, Mingzhi, et al.
Publicado: (2015)

Characteristics, Mechanism and Criterion of Channel Segregation in NbTi Alloy via Numerical Simulations and Experimental Characterizations
por: Zhu, Baohui, et al.
Publicado: (2021)

Nb$_{3}$Sn and NBTI for High Field Applications with Emphasis to Fusion Magnets
por: Duchateau, J L
Publicado: (2005)

Demonstration of engineering current density exceeding 1 kA mm$^{−2}$ in ultra-thin no-insulation, soldered coil windings using NbTi/Cu wires with CuNi cladding
por: Bykovskiy, N, et al.
Publicado: (2020)

Application of Nb$_3$Sn superconductors in high-field accelerator magnets
por: den Ouden, Andries, et al.
Publicado: (1997)

Mechanical Analysis and Assembly of MQYYM: A 90 mm NbTi Quadrupole Magnet Option for HL-LHC
por: Simon, Damien, et al.
Publicado: (2020)

A Lowgradient Triplet Quadrupole Layout Compatible with NbTi Magnet Technology and $\Beta^{*}$ = 0.25m
por: Brüning, Oliver Sim, et al.
Publicado: (2006)

Investigation of Mechanical Strains in Thermal Compensation Loop of Superconducting NbTi Cable during Bending and Cyclic Operation
por: Iluk, Artur
Publicado: (2021)

Assembly and Warm Magnetic Measurement of MQYYM: A 90 mm NbTi Quadrupole Magnet Option for HL-LHC
por: Perraud, S, et al.
Publicado: (2021)

Cannot write session to /tmp/vufind_sessions/sess_jcmord22cbcab3k3vm53a803n4