Status Report on the Construction of the Mechanical Outer Forward Module Prototypes for the SCT.

It is foreseen to assemble and test ~600 silicon detector modules of the Forward Silicon Tracker (SCT), using facilities at CERN and the University of Geneva. The mechanical tolerances of the modules being constructed are stringent, making the large scale fabrication of detector modules a challenge....

Descripción completa

Detalles Bibliográficos
Autores principales: Fortin, R, Niinikoski, T O, Roe, S, Weilhammer, Peter, Clark, A G, Ferrère, D, Macina, Daniela, Morone, C, Perrin, E, Weber, M, Zsenei, A
Lenguaje:eng
Publicado: 2000
Materias:
Detectors and Experimental Techniques
Acceso en línea:http://cds.cern.ch/record/684062
Descripción
Sumario:It is foreseen to assemble and test ~600 silicon detector modules of the Forward Silicon Tracker (SCT), using facilities at CERN and the University of Geneva. The mechanical tolerances of the modules being constructed are stringent, making the large scale fabrication of detector modules a challenge. An assembly procedure has been developed with the aim of meeting the required mechanical tolerances. The production of four prototype mechanical modules using this procedure is described. Improvements of the assembly technique planned for the production of future forward modules are outlined.

Ejemplares similares