Seconday-emission profile monitors at LEAR injection

This is a view against the direction of the beams. Through the right, smaller, opening the beams (protons, antiprotons, H-, later Pb-ions) entered and, after being put on central orbit with septum and kicker, reappeared as circulating beam through the left, larger, opening. Horizontal and vertical position and density profile of the incoming beam were measured with secondary emission grids. The same measurements were made on the beam after it had completed the first turn in the machine. For this purpose it was prevented from circulating with a beam stopper, mounted through the port at left (not mounted at the time the picture was taken).