Field Quality Measurements of LARP Nb$_{3}$Sn Magnet HQ02

Large-aperture, high-field, Nb$_{3}$Sn quadrupoles are being developed by the US LHC accelerator research program (LARP) for the High luminosity upgrade of the Large Hadron Collider (HiLumi-LHC). The first 1 m long, 120 mm aperture prototype, HQ01, was assembled with various sets of coils and tested...

Descripción completa

Detalles Bibliográficos
Autores principales: DiMarco, J, Ambrosio, G, Buehler, M, Chlachidze, G, Orris, D, Sylvester, C, Tartaglia, M, Velev, G, Yu, M, Zlobin, A, Ghosh, A, Schmalzle, J, Wanderer, P, Borgnolutti, F, Cheng, D, Dietderich, D, Felice, H, Godeke, A, Hafalia, R, Joseph, J, Lizarazo, J, Marchevsky, M, Prestemon, S O, Sabbi, G L, Salehi, A, Wang, X, Ferracin, P, Todesco, E
Lenguaje:eng
Publicado: 2014
Materias:
Accelerators and Storage Rings
Acceso en línea:https://dx.doi.org/10.1109/TASC.2013.2291557
http://cds.cern.ch/record/2025663
Descripción
Sumario:Large-aperture, high-field, Nb$_{3}$Sn quadrupoles are being developed by the US LHC accelerator research program (LARP) for the High luminosity upgrade of the Large Hadron Collider (HiLumi-LHC). The first 1 m long, 120 mm aperture prototype, HQ01, was assembled with various sets of coils and tested at LBNL and CERN. Based on these results, several design modifications have been introduced to improve the performance for HQ02, the latest model. From the field quality perspective, the most relevant improvements are a cored cable for reduction of eddy current effects, and more uniform coil components and fabrication processes. This paper reports on the magnetic measurements of HQ02 during recent testing at the Vertical Magnet Test Facility at Fermilab. Results of baseline measurements performed with a new multi-layer circuit board probe are compared with the earlier magnet. An analysis of probe and measurement system performance is also presented.

Ejemplares similares