Cargando…

Quench Performance of HQ01, a 120 mm Bore LARP Quadrupole for the LHC Upgrade

We report quench test results for the 1-meter long, 120 mm aperture Nb$_3$Sn quadrupole magnet, HQ01, designed, fabricated and tested for the LHC Accelerator Research Program (LARP). The magnet has a design gradient of 219 T/m at 1.9 K and peak field of ~15 T. Earlier tests (HQ01a, b) showed peak gr...

Descripción completa

Detalles Bibliográficos
Autores principales:	Marchevsky, M, Ambrosio, G, Bingham, B, Bossert, R, Caspi, S, Cheng, D W, Chlachidze, G, Dietderich, D, DiMarco, J, Felice, H, Ferracin, P, Ghosh, A, Hafalia, A R, Joseph, J, Lizarazo, J, Sabbi, G L, Schmalzle, J, Wanderer, P, Wang, X, Zlobin, A V
Lenguaje:	eng
Publicado:	2012
Materias:	Accelerators and Storage Rings
Acceso en línea:	https://dx.doi.org/10.1109/TASC.2012.2185671 http://cds.cern.ch/record/2773930

Ejemplares similares

Impact of Coil Compaction on Nb$_3$Sn LARP HQ Magnet
por: Felice, H, et al.
Publicado: (2012)

Design of HQ—A High Field Large Bore Nb$_3$Sn Quadrupole Magnet for LARP
por: Felice, H, et al.
Publicado: (2009)

Performance of HQ02, an optimized version of the 120 mm $Nb_3Sn$ LARP quadrupole
por: Chlachidze, G, et al.
Publicado: (2014)

Field Quality Measurements of LARP Nb$_{3}$Sn Magnet HQ02
por: DiMarco, J, et al.
Publicado: (2014)

Test Results of the LARP HQ02b Magnet at 1.9 K
por: Bajas, H, et al.
Publicado: (2015)

Test Results of 15 T Nb$_3$Sn Quadrupole Magnet HQ01 with a 120 mm Bore for the LHC Luminosity Upgrade
por: Caspi, S, et al.
Publicado: (2010)

Test Results of the LARP Nb$_3$Sn Quadrupole HQ03a
por: DiMarco, J, et al.
Publicado: (2015)

Cold Test Results of the LARP HQ Nb$_{3}$Sn Quadrupole Magnet at 1.9 K
por: Bajas, H, et al.
Publicado: (2013)

Mechanical Behavior of HQ01, a Nb$_3$Sn Accelerator-Quality Quadrupole Magnet for the LHC Luminosity Upgrade
por: Ferracin, P, et al.
Publicado: (2012)

Quench Location in the LARP MQXFS1 Prototype
por: Strauss, T, et al.
Publicado: (2017)

Magnetic and Mechanical Analysis of the HQ Model Quadrupole Designs for LARP
por: Felice, Helene, et al.
Publicado: (2008)

Test of Optimized 120-mm LARP $Nb_{3}S_n$ Quadrupole Coil Using Magnetic Mirror Structure
por: Chlachidze, G, et al.
Publicado: (2013)

Design of a 120 mm Bore 15 T Quadrupole for the LHC Upgrade Phase II
por: Caspi, S, et al.
Publicado: (2010)

Mechanical Performance of the LARP Nb$_3$Sn Quadrupole Magnet LQS01
por: Ferracin, P, et al.
Publicado: (2011)

Instrumentation and Quench Protection for LARP ${\rm Nb}_{3}{\rm Sn}$ Magnets
por: Felice, H, et al.
Publicado: (2009)

Field quality measurements and analysis of the LARP technology quadrupole models
por: Velev, G V, et al.
Publicado: (2008)

Assembly and Loading of LQS01, a Shell-Based 3.7 m Long ${\rm Nb}_{3}{\rm Sn}$ Quadrupole Magnet for LARP
por: Ferracin, P, et al.
Publicado: (2010)

Field Quality of the First LARP Nb$_3$Sn 3.7m-Long Quadrupole Model of LQ Series
por: Velev, G V, et al.
Publicado: (2011)

Development and Test of LARP Technological Quadrupole Models of TQC Series
por: Bossert, R C, et al.
Publicado: (2008)

Progress in the long $Nb_3Sn$ quadrupole R&D by LARP
por: Ambrosio, G, et al.
Publicado: (2012)

Fabrication and Test of a 3.7 m Long Support Structure for the LARP ${\hbox{Nb}}_{3}{\hbox{Sn}}$ Quadrupole Magnet LQS01
por: Ferracin, P, et al.
Publicado: (2009)

Field Quality Study of the LARP Nb$_3$Sn 3.7 m-Long Quadrupole Models of LQ series
por: Velev, G V, et al.
Publicado: (2012)

Test results of TQS03: A LARP shell-based Nb$_3$Sn quadrupole using 108/127 conductor
por: Felice, H, et al.
Publicado: (2010)

Fabrication and test of LARP technological quadrupole models of TQC series
por: Bossert, Rodger C, et al.
Publicado: (2009)

Assembly and Tests of SQ02, a Nb$_{3}$Sn Racetrack Quadrupole Magnet for LARP
por: Ferracin, P, et al.
Publicado: (2007)

Test and Analysis of Technology Quadrupole Shell (TQS) Magnet Models for LARP
por: Caspi, S, et al.
Publicado: (2008)

Design of Nb$_3$Sn coils for LARP long magnets.
por: Ambrosio, G, et al.
Publicado: (2007)

Multipoles Induced by Inter-Strand Coupling Currents in LARP Nb$_{3}$Sn Quadrupoles
por: Wang, X, et al.
Publicado: (2014)

Construction and Test of 3.6 m Nb$_3$Sn Racetrack Coils for LARP
por: Wanderer, P, et al.
Publicado: (2008)

Mechanical Design, Assembly and Testing of a Support Structure for LARP Nb$_3$Sn Quadrupole Magnets for LHC
por: Schmalzle, J, et al.
Publicado: (2012)

Mechanical Design of an Alternate Structure for LARP Nb$_{3}$Sn Quadrupole Magnets for LHC
por: Anerella, M, et al.
Publicado: (2011)

Alternative Mechanical Structure for LARP Nb$_3$Sn Quadrupoles
por: Anerella, M, et al.
Publicado: (2011)

Test Results of LARP ${\rm Nb}_{3}{\rm Sn}$ Quadrupole Magnets Using a Shell-Based Support Structure (TQS)
por: Caspi, S, et al.
Publicado: (2009)

Measurements and Analysis of Dynamic Effects in the LARP Model Quadrupole HQ02b During Rapid Discharge
por: Sorbi, Massimo, et al.
Publicado: (2016)

Test Results and Analysis of LQS03 Third Long Nb$_{3}$Sn Quadrupole by LARP
por: Ambrosio, G, et al.
Publicado: (2013)

Magnet R&D for the US LHC Accelerator Research Program (LARP)
por: Gourlay, S A, et al.
Publicado: (2006)

Test Results of the First 3.7 m long Nb$_3$Sn Quadrupole by LARP and Future Plans
por: Ambrosio, G, et al.
Publicado: (2010)

Fabrication and Test of TQS01—A 90 mm ${\rm Nb}_{3}{\rm Sn}$ Quadrupole Magnet for LARP
por: Caspi, S, et al.
Publicado: (2007)

Development and Coil Fabrication for the LARP 3.7-m Long Nb3Sn Quadrupole
por: Ambrosio, Giorgio, et al.
Publicado: (2009)

Assembly and Test of HD2, a 36 mm Bore High Field ${\rm Nb}_{3}{\rm Sn}$ Dipole Magnet
por: Ferracin, P, et al.
Publicado: (2009)

Cannot write session to /tmp/vufind_sessions/sess_0nkk05q20op2ghm41au68k6qie