A Geant4 based framework for pixel detector simulation

The output from a hybrid pixel detector depends on the interaction of the radiation with the sensor material, the transport of the resulting charge in the sensor, the pulse processing in the readout circuit and processing of the resulting signal. In order to understand the full behaviour of the device and to predict the performance of future devices it is important to have a framework that can simulate the entire process in the detector system. Geant4 is a Monte Carlo based toolkit for simulation of particle interaction with matter which is developed and actively used for CERN experiments and detector development [1]. By extending the Monte Carlo code in Geant4 with a charge carrier transport model of the sensor material and basic amplifier functionality as well as read out logic, a simulation of the complete detector system is possible. The MEDIPIX is a state of the art hybrid pixel detector that allows bonding of a wide range of sensor materials [2,3]. Simulation models have been developed and tested for different chips from the MEDIPIX family. The simulation is defined using configuration files to set the geometry, sensor material properties, number of pixels, pixel pitch and chip properties. Source properties as well as filters and objects in the beam can be added for different experimental set-ups. The interaction of radiation with the sensor is taken into account in the transport of the charge carriers in the sensor material and a current induced in the pixel electrode that triggers an amplifier response. Simulation results have been verified with X-ray fluorescence and radioactive sources using MEDIPIX family chips. In this paper we present the developed simulation framework and first results.