CERN Linac4 Drift Tube Linac Manufacturing and Assembly

The manufacturing of the Linac4 Drift Tube Linac (DTL) components has been completed and the assembly of the structures is in its final stages. 3 tanks of 3.9m, 7.3m, and 7.3m, designed to accelerate a 40mA average pulse current H–beam from 3 to 50MeV, are being assembled from 2, 4 and 4 segments of...

Descripción completa

Detalles Bibliográficos
Autores principales: Ramberger, Suitbert, Bourquin, Pierre, Cherif, Ahmed, Cuvet, Yves, Dallocchio, Alessandro, Favre, Gilles, Fuchs, Jean-Frederic, Geisser, Jean-Marie, Gerigk, Frank, Giguet, Jean-Michel, Hansen, Jan, Polini, Marc, Sgobba, Stefano, Thaus, Nicolas, Vretenar, Maurizio
Lenguaje:eng
Publicado: 2014
Materias:
Accelerators and Storage Rings
Acceso en línea:http://cds.cern.ch/record/2062615
_version_ 1780948557103104000
author Ramberger, Suitbert
Bourquin, Pierre
Cherif, Ahmed
Cuvet, Yves
Dallocchio, Alessandro
Favre, Gilles
Fuchs, Jean-Frederic
Geisser, Jean-Marie
Gerigk, Frank
Giguet, Jean-Michel
Hansen, Jan
Polini, Marc
Sgobba, Stefano
Thaus, Nicolas
Vretenar, Maurizio
author_facet Ramberger, Suitbert
Bourquin, Pierre
Cherif, Ahmed
Cuvet, Yves
Dallocchio, Alessandro
Favre, Gilles
Fuchs, Jean-Frederic
Geisser, Jean-Marie
Gerigk, Frank
Giguet, Jean-Michel
Hansen, Jan
Polini, Marc
Sgobba, Stefano
Thaus, Nicolas
Vretenar, Maurizio
author_sort Ramberger, Suitbert
collection CERN
description The manufacturing of the Linac4 Drift Tube Linac (DTL) components has been completed and the assembly of the structures is in its final stages. 3 tanks of 3.9m, 7.3m, and 7.3m, designed to accelerate a 40mA average pulse current H–beam from 3 to 50MeV, are being assembled from 2, 4 and 4 segments of about 2.0m length, containing each from 22 drift tubes at the low energy end, down to only 6 at the high energy end. Due to its peculiar design avoiding adjustment mechanisms on the drift tube, tight tolerances have to be maintained in the production. This paper discusses the assembly stages that are used to achieve the tolerances over the full length of the structures. Metrology results on the assembled DTL Tank1 confirm the required precision.
id oai-inspirehep.net-1363555
institution Organización Europea para la Investigación Nuclear
language eng
publishDate 2014
record_format invenio
spelling oai-inspirehep.net-13635552019-09-30T06:29:59Zhttp://cds.cern.ch/record/2062615engRamberger, SuitbertBourquin, PierreCherif, AhmedCuvet, YvesDallocchio, AlessandroFavre, GillesFuchs, Jean-FredericGeisser, Jean-MarieGerigk, FrankGiguet, Jean-MichelHansen, JanPolini, MarcSgobba, StefanoThaus, NicolasVretenar, MaurizioCERN Linac4 Drift Tube Linac Manufacturing and AssemblyAccelerators and Storage RingsThe manufacturing of the Linac4 Drift Tube Linac (DTL) components has been completed and the assembly of the structures is in its final stages. 3 tanks of 3.9m, 7.3m, and 7.3m, designed to accelerate a 40mA average pulse current H–beam from 3 to 50MeV, are being assembled from 2, 4 and 4 segments of about 2.0m length, containing each from 22 drift tubes at the low energy end, down to only 6 at the high energy end. Due to its peculiar design avoiding adjustment mechanisms on the drift tube, tight tolerances have to be maintained in the production. This paper discusses the assembly stages that are used to achieve the tolerances over the full length of the structures. Metrology results on the assembled DTL Tank1 confirm the required precision.CERN-ACC-2014-369oai:inspirehep.net:13635552014
spellingShingle Accelerators and Storage Rings
Ramberger, Suitbert
Bourquin, Pierre
Cherif, Ahmed
Cuvet, Yves
Dallocchio, Alessandro
Favre, Gilles
Fuchs, Jean-Frederic
Geisser, Jean-Marie
Gerigk, Frank
Giguet, Jean-Michel
Hansen, Jan
Polini, Marc
Sgobba, Stefano
Thaus, Nicolas
Vretenar, Maurizio
CERN Linac4 Drift Tube Linac Manufacturing and Assembly
title CERN Linac4 Drift Tube Linac Manufacturing and Assembly
title_full CERN Linac4 Drift Tube Linac Manufacturing and Assembly
title_fullStr CERN Linac4 Drift Tube Linac Manufacturing and Assembly
title_full_unstemmed CERN Linac4 Drift Tube Linac Manufacturing and Assembly
title_short CERN Linac4 Drift Tube Linac Manufacturing and Assembly
title_sort cern linac4 drift tube linac manufacturing and assembly
topic Accelerators and Storage Rings
url http://cds.cern.ch/record/2062615
work_keys_str_mv AT rambergersuitbert cernlinac4drifttubelinacmanufacturingandassembly
AT bourquinpierre cernlinac4drifttubelinacmanufacturingandassembly
AT cherifahmed cernlinac4drifttubelinacmanufacturingandassembly
AT cuvetyves cernlinac4drifttubelinacmanufacturingandassembly
AT dallocchioalessandro cernlinac4drifttubelinacmanufacturingandassembly
AT favregilles cernlinac4drifttubelinacmanufacturingandassembly
AT fuchsjeanfrederic cernlinac4drifttubelinacmanufacturingandassembly
AT geisserjeanmarie cernlinac4drifttubelinacmanufacturingandassembly
AT gerigkfrank cernlinac4drifttubelinacmanufacturingandassembly
AT giguetjeanmichel cernlinac4drifttubelinacmanufacturingandassembly
AT hansenjan cernlinac4drifttubelinacmanufacturingandassembly
AT polinimarc cernlinac4drifttubelinacmanufacturingandassembly
AT sgobbastefano cernlinac4drifttubelinacmanufacturingandassembly
AT thausnicolas cernlinac4drifttubelinacmanufacturingandassembly
AT vretenarmaurizio cernlinac4drifttubelinacmanufacturingandassembly

Ejemplares similares