Performance of the Short Model Coils Wound With the CERN 11-T Nb$_3$Sn Conductor

The short model coil (SMC) dipole magnet has been designed and constructed in the framework of the European project EuCARD as a test bed for Nb_3Sn magnet R&D; in terms of coil fabrication technology and testing of Rutherford-type cables. Two pairs of racetrack coils were successfully tested in 2012, obtaining 12.5 T in the winding at 1.9 K, thus demonstrating SMC as a valid magnet design for conductor tests. These successful results prompted a new test campaign of SMC using the cable of the 11-T dipole project. The size of this cable is such that only one double pancake can be accommodated in the mechanical structure. During the latest tests using the 11-T cable, a new record field of 13.5 T was achieved, confirming the excellent capability of SMC to qualify a conductor, providing precise information of the stability and general cable performance, and to test insulation techniques, instrumentation systems, and coil fabrication processes. This paper describes the challenges of this new assembly, indicating novelties in the fabrication technology and reports on the measurements and the performance of SMC using CERN's 11-T-dipole-type conductor.