New bridge temperature sensor for superconducting magnets and other cryogenic applications

A few hundred temperature sensors are used to monitor the temperature behavior of the gigantic ATLAS toroid superconducting magnet system during cool down and normal operation. In order to guarantee good sensitivity of temperature measurements in the range from liquid helium to room temperature, two types of sensors are positioned at the same location: platinum resistance thermometers for the range 30–300 K and carbon composition resistors (Allen-Bradley) for the 4–30 K range. Both types are very well known for use in cryogenics and they have performed satisfactorily during 10 year of ATLAS operation. The sensors themselves are easily available and inexpensive and the main cost is for the many kilometers of cold and warm instrumentation cables, connectors, conditioners, and installation work. A reduction of the amount of measurement channels is an important issue and this motivated us to develop a new compact and robust sensor module covering the entire temperature range that would combine advantages of both platinum and carbon resistors. The solution is trivial, elegant, and simple. Two resistors with positive temperature derivative and two resistors with negative temperature derivative are connected in a full-bridge connection. We used two platinum and two carbon resistors. The output signal is a result of the subtraction of voltages across positive and negative temperature derivative resistors that makes this temperature bridge sensor very sensitive for the entire temperature range. Variable temperature characterization tests were performed in the helium gas environment in the CERN Cryogenic Laboratory. Our measurements have demonstrated that the bridge sensors have a full range sensitivity better than 0.1 mV/K at a supply current of 100 $\mu$ A. In the meantime, a few other superconducting detector magnets in experiments operating at CERN are equipped with these new, simple, and robust temperature sensors.