Cargando…
Realization and First Test Results of the EuCARD 5.4-T REBCO Dipole Magnet
A high-temperature critical superconductor (HTS) dipole magnet relying on 12-mm REBCO tapes was built at CEA Saclay in 2016. Magnet studies had been started in the framework of the EuCARD High Field Magnet program and continued within a collaboration agreement between CEA-Saclay and CERN. The final...
Autores principales: | , , , , , , |
---|---|
Lenguaje: | eng |
Publicado: |
2018
|
Materias: | |
Acceso en línea: | https://dx.doi.org/10.1109/TASC.2018.2796063 http://cds.cern.ch/record/2314471 |
Sumario: | A high-temperature critical superconductor (HTS) dipole magnet relying on 12-mm REBCO tapes was built at CEA Saclay in 2016. Magnet studies had been started in the framework of the EuCARD High Field Magnet program and continued within a collaboration agreement between CEA-Saclay and CERN. The final goal is to generate 5.4 T at 4.2 K in the 13-T background field of the FRESCA2 Nb$_{3}$Sn dipole magnet. The HTS winding is made of three double-layer racetrack-type coils, wound from a stack of two double-layer REBCO tapes, stabilized with beryllium copper ribbons. Before it is installed inside the aperture of FRESCA2, at CERN, the magnet has been tested at CEA-Saclay in the standalone mode. In this paper, after a brief recall of the magnet design, we will report on the magnet manufacturing and the first powering tests results. |
---|