Cargando…
Simulation of Hydrodynamic Tunneling Caused by High-Energy Proton Beam in Copper through Coupling of FLUKA and Autodyn
For machine protection of high-energy colliders, it is important to assess potential damages caused to accelerator components in case large number of bunches are lost at the same place. The numerical assessment requires an iterative execution of an energy-deposition code and a hydrodynamic code, sin...
Autores principales: | , , , , , , |
---|---|
Lenguaje: | eng |
Publicado: |
2018
|
Materias: | |
Acceso en línea: | https://dx.doi.org/10.18429/JACoW-IPAC2018-MOPMF046 http://cds.cern.ch/record/2665768 |
Sumario: | For machine protection of high-energy colliders, it is important to assess potential damages caused to accelerator components in case large number of bunches are lost at the same place. The numerical assessment requires an iterative execution of an energy-deposition code and a hydrodynamic code, since the hydrodynamic tunneling effect will likely play an important role in the beam-matter interactions. For proton accelerators at CERN and for the Future Circular Collider (FCC), case studies were performed, coupling FLUKA and BIG2. To compare different hydrocodes and not to rely only on BIG2, FLUKA and a commercial tool, Autodyn, have been used to perform these simulations. This paper reports a benchmarking study against a beam test performed at the HiRadMat (High-Radiation to Materials) facility using beams at 440 GeV from the Super Proton Synchrotron. Good agreement has been found between the simulation results and the test as well as previous simulations with FLUKA and BIG2, particularly in terms of penetration depth of the beam in copper. This makes the coupling of FLUKA and Autodyn an alternative solution to simulating the hydrodynamic tunneling. More case studies are planned for FCC and other high-beam-power accelerators. |
---|