Cargando…

10 kA Joints for HTS Roebel Cables

Future high temperature superconductor (HTS) high field magnets using multitape HTS cables need 10-kA low-resistance connections. The connections are needed between the poles of the magnets and at the terminals in a wide-operating temperature range, from 1.9-85 K. The EuCARD-WP10 Future Magnets coll...

Descripción completa

Detalles Bibliográficos
Autores principales:	Murtomaki, Jaakko Samuel, Kirby, Glyn, van Nugteren, Jeroen, Contat, Pierre-Antoine, Sacristan-de-Frutos, Oscar, Fleiter, Jerome, Pincot, Francois-Olivier, de Rijk, Gijs, Rossi, Lucio, Ruuskanen, Janne, Stenvall, Antti, Wolf, Felix J
Lenguaje:	eng
Publicado:	2018
Materias:	Accelerators and Storage Rings
Acceso en línea:	https://dx.doi.org/10.1109/TASC.2018.2804951 http://cds.cern.ch/record/2676576

Ejemplares similares

Mechanical Effects of the Non-Uniform Current Distribution on HTS Coils for Accelerators Wound with REBCO Roebel Cable
por: Murtomaki, Jaakko S, et al.
Publicado: (2017)

Investigation of REBCO Roebel Cable Irreversible Critical Current Degradation Under Transverse Pressure
por: Murtomaki, Jaakko Samuel, et al.
Publicado: (2018)

How to Computationally Determine the Maximum Stable Operation Current of an HTS Magnet
por: Ruuskanen, Janne, et al.
Publicado: (2019)

3-D Mechanical Modeling of 20 T HTS Clover Leaf End Coils—Good Practices and Lessons Learned
por: Murtomäki, Jaakko Samuel, et al.
Publicado: (2019)

Towards REBCO 20T+ dipoles for accelerators
por: van Nugteren, Jeroen, et al.
Publicado: (2018)

ICED—Inductively Coupled Energy Dissipater for Future High-Field Accelerator Magnets
por: Murtomäki, Jaakko Samuel, et al.
Publicado: (2018)

On Roebel Cable Geometry for Accelerator Magnet
por: Fleiter, J, et al.
Publicado: (2016)

On Roebel Cable Geometry for Accelerator Magnet
por: Fleiter, J, et al.
Publicado: (2015)

Preliminary Integration for Testing HTS Feather-M2 in the FRESCA2 Dipole Magnet
por: Martins Araujo, Douglas, et al.
Publicado: (2020)

Prototype Roebel cable to be used to wind a HTS accelerator demonstration dipole
por: Barnard, Henry
Publicado: (2014)

Inter-strand resistance and AC loss in resin-filler impregnated ReBCO Roebel cables
por: Gao, P, et al.
Publicado: (2019)

Study of a 5T Research Dipole Insert-Magnet using an Anisotropic ReBCO Roebel Cable
por: Van Nugteren, J, et al.
Publicado: (2015)

Cos-$\theta$ design of dipole inserts made of ReBCO-Roebel or BSCCO-Rutherford cables
por: Lorin, C, et al.
Publicado: (2015)

Characterization of Roebel Cables for Potential Use in High-Field Magnets
por: Fleiter, J, et al.
Publicado: (2015)

Measurement and Numerical Evaluation of AC-Losses in a ReBCO Roebel Cable at 4.5 K
por: van Nugteren, J., et al.
Publicado: (2016)

A fast quench protection system for high-temperature superconducting magnets
por: van Nugteren, Jeroen, et al.
Publicado: (2018)

First tests of twisted-pair HTS 1 kA range cables for use in superconducting links
por: Ballarino, A, et al.
Publicado: (2011)

First Cold Powering Test of REBCO Roebel Wound Coil for the EuCARD2 Future Magnet Development Project
por: Kirby, Glyn A, et al.
Publicado: (2017)

Magnetization Losses of Roebel Cable Samples with 2G YBCO Coated Conductor Strands
por: Yang, Y., et al.
Publicado: (2016)

Development of a Roebel-cable-based cosθ dipole: design and windability of magnet ends
por: Lorin, Clément, et al.
Publicado: (2016)

Effect of resin impregnation on the transverse pressure dependence of the critical current in ReBCO Roebel cables
por: Gao, P, et al.
Publicado: (2019)

Powering of an HTS dipole insert-magnet operated standalone in helium gas between 5 and 85 K
por: Van Nugteren, J, et al.
Publicado: (2018)

Manufacturing of the EuCARD2 Roebel-Based Cos-Theta Coils at CEA Saclay
por: Durante, Maria, et al.
Publicado: (2020)

Hot Spot Temperature in an HTS Coil: Simulations With MIITs and Finite Element Method
por: Härö, E, et al.
Publicado: (2015)

Modeling of Minimum Energy Required to Quench an HTS Magnet With a Strip Heater
por: Härö, E, et al.
Publicado: (2015)

Idealized Coil Cross-Sections with Minimized Conductor Area for High Field Dipoles
por: van Nugteren, Jeroen, et al.
Publicado: (2018)

Modelling thermodynamics in a high-temperature superconducting dipole magnet: an inverse problem based approach
por: Ruuskanen, J, et al.
Publicado: (2019)

EuCARD-2 Roebel cable 5 m
por: Kario, A, et al.
Publicado: (2015)

Hi-Lumi LHC Twin Aperture Orbit Correctors 0.5-m Model Magnet Development and Cold Test
por: Kirby, Glyn A, et al.
Publicado: (2018)

Enhancement of the transverse stress tolerance of REBCO Roebel cables by epoxy impregnation
por: Otten, S., et al.
Publicado: (2015)

Hi-Lumi LHC Twin-Aperture Orbit Correctors Magnet System Optimisation
por: Kirby, Glyn A, et al.
Publicado: (2017)

Measurement and Analysis of the Dynamic Effects in an HTS Dipole Magnet
por: Petrone, Carlo, et al.
Publicado: (2018)

The EuCARD-2 Future Magnets European Collaboration for Accelerator-Quality HTS Magnets
por: Rossi, L, et al.
Publicado: (2015)

The EuCARD-2 Future Magnets European Collaboration for Accelerator-Quality HTS Magnets
por: Rossi, L, et al.
Publicado: (2014)

HTS Insert Magnet Design Study
por: Devaux, M, et al.
Publicado: (2011)

Performance and quench characteristics of a pancake coil wound with the 2G YBCO Roebel cable
por: Zhang, Qingbo, et al.
Publicado: (2018)

Accelerator Quality HTS Dipole Magnet Demonstrator designs for the EuCARD-2, 5 Tesla 40 mm Clear Aperture Magnet
por: Kirby, G, et al.
Publicado: (2014)

Fault Current Limitation in Electrical Power Networks Containing HTS Cable and HTS Fuse
por: Degtyarenko, Pavel N., et al.
Publicado: (2022)

Evaluation of HTS samples for 12.5 kA current leads
por: Teng, M, et al.
Publicado: (1997)

A prototype 13 kA HTS current lead for the LHC
por: Laurent Guiraud
Publicado: (2000)

Cannot write session to /tmp/vufind_sessions/sess_oh863dbi0dnmmvagt1nktrmrt1