Cargando…

Test of short model and prototype of the HL-LHC D2 orbit corrector based on CCT technology

In the frame of the high-luminosity upgrade project for the large hadron collider, new twin aperture beam orbit corrector magnets will be installed near the recombination dipole (D2). These magnets are 2.2 m long canted cosine theta NbTi dipoles, with two independently powered apertures oriented suc...

Descripción completa

Detalles Bibliográficos
Autores principales:	Mangiarotti, Franco, Kirby, Glyn, Duda, Michal, Mentink, Matthias, Fiscarelli, Lucio, Bajko, Marta, Coll, Dominic, Desbiolles, Vincent, Feuvrier, Jerome, Mazet, Jacky, van Nugteren, Jeroen, Pepitone, Kevin, Pincot, Francois Olivier, de Rijk, Gijs, Robertson, Jeff, Steckert, Jens, Todesco, Ezio, Willering, Gerard
Lenguaje:	eng
Publicado:	2019
Materias:	Accelerators and Storage Rings
Acceso en línea:	https://dx.doi.org/10.1109/TASC.2019.2897347 http://cds.cern.ch/record/2676908

Ejemplares similares

Test of the First Full-Length Prototype of the HL-LHC D2 Orbit Corrector Based on Canted Cosine Theta Technology
por: Mangiarotti, Franco J, et al.
Publicado: (2020)

Assembly and Test of the HL-LHC Twin Aperture Orbit Corrector Based on Canted Cos-Theta Design
por: Kirby, G, et al.
Publicado: (2020)

Hi-Lumi LHC Twin Aperture Orbit Correctors 0.5-m Model Magnet Development and Cold Test
por: Kirby, Glyn A, et al.
Publicado: (2018)

Simulated Versus Experimentally Observed Quench Behavior of the HL-LHC Twin Aperture Orbit Corrector Prototype
por: Mentink, Matthias, et al.
Publicado: (2020)

Quench Behavior of the HL-LHC Twin Aperture Orbit Correctors
por: Mentink, Matthias, et al.
Publicado: (2018)

Hi-Lumi LHC Twin-Aperture Orbit Correctors Magnet System Optimisation
por: Kirby, Glyn A, et al.
Publicado: (2017)

Test Results of the CERN HL-LHC low-$\beta$ Quadrupole Short Models MQXFS3c and MQXFS4
por: Mangiarotti, Franco J, et al.
Publicado: (2019)

Power Tests of the First Nested Orbit Corrector Prototype for HL-LHC
por: García-Matos, Jesús A, et al.
Publicado: (2020)

Quench Behavior of Prototype Nb-Ti HL-LHC Dipole Canted Cos-Theta Orbit Corrector Magnets
por: Wozniak, Mariusz, et al.
Publicado: (2022)

Power test of the second-generation Compact Linear Collider (CLIC) Nb$_3$Sn damping wiggler short model
por: Duda, Michal, et al.
Publicado: (2019)

Powering Performance and Endurance Beyond Design Limits of HL-LHC Low-Beta Quadrupole Model Magnets
por: Mangiarotti, Franco J, et al.
Publicado: (2021)

Fabrication and Power Test of the Second MCBXFB Nested Orbit Corrector Prototype for HL-LHC
por: García-Matos, Jesús A, et al.
Publicado: (2021)

Magnetic measurements on the prototype magnets of the high-order correctors for HL-LHC
por: Fiscarelli, Lucio, et al.
Publicado: (2019)

Magnetic measurements of MCBC and MCBY orbit correctors under special cycling conditions
por: Chmielinska, Agnieszka, et al.
Publicado: (2022)

Comparison of Cold Powering Performance of 2-m-Long Nb$_{3}$Sn 11 T Model Magnets
por: Willering, Gerard, et al.
Publicado: (2018)

A Method for Greatly Reduced Edge Effects and Crosstalk in CCT Magnets
por: Koratzinos, M., et al.
Publicado: (2017)

Mechanical design of a nested 4-layer Canted Cosine Theta (CCT) dipole
por: Ortwein, Rafal, et al.
Publicado: (2020)

Power Test of the First Two HL-LHC Insertion Quadrupole Magnets Built at CERN
por: Mangiarotti, F J, et al.
Publicado: (2022)

Magnetization in superconducting corrector magnets and impact on luminosity-calibration scans in the Large Hadron Collider
por: Chmielinska, Agnieszka, et al.
Publicado: (2023)

Design of Radiation Hard Spare Units for the Orbit Corrector Dipoles of LHC
por: Louzguiti, Alexandre, et al.
Publicado: (2020)

First Short Orbit Nested Corrector Magnet for HL-LHC Produced in the Industry
por: Jardim, C Martins, et al.
Publicado: (2023)

Preliminary Integration for Testing HTS Feather-M2 in the FRESCA2 Dipole Magnet
por: Martins Araujo, Douglas, et al.
Publicado: (2020)

Detailed magnetic and mechanical design of the nested orbit correctors for HL-LHC
por: García-Matos, Jesús Ángel, et al.
Publicado: (2018)

Engineering design and fabrication of the nested orbit corrector prototype for HL-LHC
por: García-Matos, Jesús Ángel, et al.
Publicado: (2019)

Magnetic Design of a Superconducting Toroidal Gantry for Hadron Therapy
por: Felcini, Enrico, et al.
Publicado: (2020)

Towards REBCO 20T+ dipoles for accelerators
por: van Nugteren, Jeroen, et al.
Publicado: (2018)

FEM modeling of multilayer Canted Cosine Theta (CCT) magnets with orthotropic material properties
por: Ortwein, R, et al.
Publicado: (2020)

Towards an Optimized Coupling-loss Induced Quench Protection System (CLIQ) for Quadrupole Magnets
por: Ravaioli, Emmanuele, et al.
Publicado: (2015)

First Cold Powering Test of REBCO Roebel Wound Coil for the EuCARD2 Future Magnet Development Project
por: Kirby, Glyn A, et al.
Publicado: (2017)

Parametric FEM modeling of multilayer castellated canted cosine theta (CCT) magnets
por: Ortwein, Rafal, et al.
Publicado: (2021)

ICED—Inductively Coupled Energy Dissipater for Future High-Field Accelerator Magnets
por: Murtomäki, Jaakko Samuel, et al.
Publicado: (2018)

Optimization of the High Order Correctors for HL-LHC Toward the Series Production
por: Statera, Marco, et al.
Publicado: (2021)

Status of the Activity for the Construction of the HL-LHC Superconducting High Order Corrector Magnets at LASA-Milan
por: Sorbi, Massimo, et al.
Publicado: (2017)

Fast Cycled Magnet demonstrator program at CERN: Instrumentation and measurement campaign
por: Willering, G, et al.
Publicado: (2014)

Status of the Production of the LHC Superconducting Corrector Magnets
por: Allitt, M, et al.
Publicado: (2004)

10 kA Joints for HTS Roebel Cables
por: Murtomaki, Jaakko Samuel, et al.
Publicado: (2018)

Design of a Canted-cosine-theta orbit corrector for the High Luminosity LHC
por: Pepitone, K., et al.
Publicado: (2022)

First Prototype of the Long Orbit Nested Corrector for HL-LHC
por: Toral, F, et al.
Publicado: (2023)

Cold Powering Performance of the First 2 m $Nb_3Sn$ DS11T Twin-Aperture Model Magnet at CERN
por: Willering, G P, et al.
Publicado: (2017)

Idealized Coil Cross-Sections with Minimized Conductor Area for High Field Dipoles
por: van Nugteren, Jeroen, et al.
Publicado: (2018)

Cannot write session to /tmp/vufind_sessions/sess_98bb2p7m207gr3hb4cgm4p3500