Development of the SLRI beam test facility for characterization of monolithic active pixel sensors

Synchrotron Light Research Institute (SLRI) has successfully constructed a new experimental station, a Beam Test Facility (BTF), to the current SLRI accelerator complex. SLRI-BTF is capable of producing electron test beams with the number of electrons ranging from a few to millions of electrons per spill and with tunable energy from 40 MeV up to 1.2 GeV. The required intensity and energy of the test beam are obtained using a combination of a metal target to reduce high-intensity primary beam and a synchrotron booster to accelerate secondary beam to desired energy. The repetition rate of the test beam is up to 0.5 Hz depending on the selected energy and the pulse width is 90 ns. SLRI-BTF targets to service electron test beams with defined intensity and energy for testing and calibration of high-energy particle detectors as well as other beam diagnostic instrumentations. In commissioning, a pixel sensor telescope was employed as a detector to measure the number of electrons and as a preparation to investigate efficiency of mono active pixel sensors. The results confirm production of the low multiplicity of high-energy electrons at SLRI-BTF and the efficiency of a test pixel sensor is successfully calculated.