Potential of waste mangosteen shell in the removal of cadmium ions: Effects of pH, contact time, and temperature

In this study, waste biomass adsorbents produced from mangosteen shells (MGS) were prepared (denoted as MGS500 and MGS1000). The physical and chemical characteristics, such as scanning electron microscopy, thermogravimetric-differential thermal analysis, specific surface area, pore volumes, surface functional groups, and point of zero charge of the prepared MGS samples were determined, and the adsorption capacity of cadmium ions from aqueous media was assessed. The effects of pH, adsorption time, temperature, and coexistence on adsorption were carefully assessed using an inductively coupled plasma optical emission spectrometer under several experimental conditions. The adsorption capacity decreased in the order, MGS < MGS500 < MGS1000. The optimal pH for cadmium ion removal was 5.0. The amount of cadmium ions adsorbed gradually increased with time, and adsorption equilibrium was achieved within 24 h after adsorption. Additionally, the amount of adsorbed cadmium ions increased with increasing adsorption temperature. To elucidate the adsorption mechanism in detail, the elemental distribution and X-ray photoelectron spectra of the prepared adsorbents were analyzed. Finally, desorption solutions such as HNO(3), H(2)O, and NaOH were used to desorb the absorbed cadmium ions from MGS1000. Under our experimental conditions, the desorption percentage of cadmium ions was approximately 98.8% using HNO(3). In conclusion, MGS1000 exhibited a good adsorption capacity of 12.0 mg/g for adsorbing cadmium ions from aqueous media and desorption capacity with HNO(3) at 1000 mmol/L.