Cargando…
Evaluation of the Selected Mechanical and Aesthetic Properties of Experimental Resin Dental Composites Containing 1-phenyl-1,2 Propanedione or Phenylbis(2,4,6-trimethylbenzoyl)-phosphine Oxide as a Photoinitiator
The goal of this study was to compare the mechanical properties of experimental resin dental composites containing a conventional photoinitiating system (camphorquinone CQ and 2-(dimethylami-no)ethyl methacrylate (DMAEMA)) to a photoinitiator system containing 1-phenyl-1,2 propanedione (PPD) with 2-...
Autores principales: | , , , , , , |
---|---|
Formato: | Online Artículo Texto |
Lenguaje: | English |
Publicado: |
MDPI
2023
|
Materias: | |
Acceso en línea: | https://www.ncbi.nlm.nih.gov/pmc/articles/PMC10053791/ https://www.ncbi.nlm.nih.gov/pubmed/36982646 http://dx.doi.org/10.3390/ijms24065573 |
_version_ | 1785015496715796480 |
---|---|
author | Kowalska-Kuczyńska, Andrea Sokołowski, Jerzy Szynkowska-Jóźwik, Małgorzata Iwona Gozdek, Tomasz Klajn, Katarzyna Kopacz, Karolina Bociong, Kinga |
author_facet | Kowalska-Kuczyńska, Andrea Sokołowski, Jerzy Szynkowska-Jóźwik, Małgorzata Iwona Gozdek, Tomasz Klajn, Katarzyna Kopacz, Karolina Bociong, Kinga |
author_sort | Kowalska-Kuczyńska, Andrea |
collection | PubMed |
description | The goal of this study was to compare the mechanical properties of experimental resin dental composites containing a conventional photoinitiating system (camphorquinone CQ and 2-(dimethylami-no)ethyl methacrylate (DMAEMA)) to a photoinitiator system containing 1-phenyl-1,2 propanedione (PPD) with 2-(dimethylami-no)ethyl methacrylate) or acting alone phenylbis(2,4,6-trimethylbenzoyl)-phosphine oxide (BAPO). The manually produced composites consisted of an organic matrix: bis-GMA (60 wt. %), TEGDMA (40 wt. %), and silanized silica filler (45 wt. %). The composites contained 0.4/0.8 wt. %, 0.8/1.6 wt. %, and 1/2 wt. % of PPD/DMAEMA and another group included 0.25, 0.5, or 1 wt. % of BAPO. Vickers hardness, microhardness (in the nanoindentation test), diametral tensile strength, and flexural strength were assessed, and CIE L* a* b* colorimetric analysis was conducted for each composite produced. The highest average Vickers hardness values were obtained for the composite containing 1 wt. % BAPO (43.73 ± 3.52 HV). There was no statistical difference in the results of diametral tensile strength for the experimental composites tested. The results of 3-point bending tests were the highest for composites containing CQ (77.3 ± 8.84 MPa). Despite the higher hardness of experimental composites including PPD or BAPO, compared with composites with CQ, the overall results indicate that the composite with CQ still represents a better solution when used as a photoinitiator system. Moreover, the composites containing PPD and DMAEMA are not promising in terms of color or mechanical properties, especially as they require significantly longer irradiation times. |
format | Online Article Text |
id | pubmed-10053791 |
institution | National Center for Biotechnology Information |
language | English |
publishDate | 2023 |
publisher | MDPI |
record_format | MEDLINE/PubMed |
spelling | pubmed-100537912023-03-30 Evaluation of the Selected Mechanical and Aesthetic Properties of Experimental Resin Dental Composites Containing 1-phenyl-1,2 Propanedione or Phenylbis(2,4,6-trimethylbenzoyl)-phosphine Oxide as a Photoinitiator Kowalska-Kuczyńska, Andrea Sokołowski, Jerzy Szynkowska-Jóźwik, Małgorzata Iwona Gozdek, Tomasz Klajn, Katarzyna Kopacz, Karolina Bociong, Kinga Int J Mol Sci Article The goal of this study was to compare the mechanical properties of experimental resin dental composites containing a conventional photoinitiating system (camphorquinone CQ and 2-(dimethylami-no)ethyl methacrylate (DMAEMA)) to a photoinitiator system containing 1-phenyl-1,2 propanedione (PPD) with 2-(dimethylami-no)ethyl methacrylate) or acting alone phenylbis(2,4,6-trimethylbenzoyl)-phosphine oxide (BAPO). The manually produced composites consisted of an organic matrix: bis-GMA (60 wt. %), TEGDMA (40 wt. %), and silanized silica filler (45 wt. %). The composites contained 0.4/0.8 wt. %, 0.8/1.6 wt. %, and 1/2 wt. % of PPD/DMAEMA and another group included 0.25, 0.5, or 1 wt. % of BAPO. Vickers hardness, microhardness (in the nanoindentation test), diametral tensile strength, and flexural strength were assessed, and CIE L* a* b* colorimetric analysis was conducted for each composite produced. The highest average Vickers hardness values were obtained for the composite containing 1 wt. % BAPO (43.73 ± 3.52 HV). There was no statistical difference in the results of diametral tensile strength for the experimental composites tested. The results of 3-point bending tests were the highest for composites containing CQ (77.3 ± 8.84 MPa). Despite the higher hardness of experimental composites including PPD or BAPO, compared with composites with CQ, the overall results indicate that the composite with CQ still represents a better solution when used as a photoinitiator system. Moreover, the composites containing PPD and DMAEMA are not promising in terms of color or mechanical properties, especially as they require significantly longer irradiation times. MDPI 2023-03-14 /pmc/articles/PMC10053791/ /pubmed/36982646 http://dx.doi.org/10.3390/ijms24065573 Text en © 2023 by the authors. https://creativecommons.org/licenses/by/4.0/Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/). |
spellingShingle | Article Kowalska-Kuczyńska, Andrea Sokołowski, Jerzy Szynkowska-Jóźwik, Małgorzata Iwona Gozdek, Tomasz Klajn, Katarzyna Kopacz, Karolina Bociong, Kinga Evaluation of the Selected Mechanical and Aesthetic Properties of Experimental Resin Dental Composites Containing 1-phenyl-1,2 Propanedione or Phenylbis(2,4,6-trimethylbenzoyl)-phosphine Oxide as a Photoinitiator |
title | Evaluation of the Selected Mechanical and Aesthetic Properties of Experimental Resin Dental Composites Containing 1-phenyl-1,2 Propanedione or Phenylbis(2,4,6-trimethylbenzoyl)-phosphine Oxide as a Photoinitiator |
title_full | Evaluation of the Selected Mechanical and Aesthetic Properties of Experimental Resin Dental Composites Containing 1-phenyl-1,2 Propanedione or Phenylbis(2,4,6-trimethylbenzoyl)-phosphine Oxide as a Photoinitiator |
title_fullStr | Evaluation of the Selected Mechanical and Aesthetic Properties of Experimental Resin Dental Composites Containing 1-phenyl-1,2 Propanedione or Phenylbis(2,4,6-trimethylbenzoyl)-phosphine Oxide as a Photoinitiator |
title_full_unstemmed | Evaluation of the Selected Mechanical and Aesthetic Properties of Experimental Resin Dental Composites Containing 1-phenyl-1,2 Propanedione or Phenylbis(2,4,6-trimethylbenzoyl)-phosphine Oxide as a Photoinitiator |
title_short | Evaluation of the Selected Mechanical and Aesthetic Properties of Experimental Resin Dental Composites Containing 1-phenyl-1,2 Propanedione or Phenylbis(2,4,6-trimethylbenzoyl)-phosphine Oxide as a Photoinitiator |
title_sort | evaluation of the selected mechanical and aesthetic properties of experimental resin dental composites containing 1-phenyl-1,2 propanedione or phenylbis(2,4,6-trimethylbenzoyl)-phosphine oxide as a photoinitiator |
topic | Article |
url | https://www.ncbi.nlm.nih.gov/pmc/articles/PMC10053791/ https://www.ncbi.nlm.nih.gov/pubmed/36982646 http://dx.doi.org/10.3390/ijms24065573 |
work_keys_str_mv | AT kowalskakuczynskaandrea evaluationoftheselectedmechanicalandaestheticpropertiesofexperimentalresindentalcompositescontaining1phenyl12propanedioneorphenylbis246trimethylbenzoylphosphineoxideasaphotoinitiator AT sokołowskijerzy evaluationoftheselectedmechanicalandaestheticpropertiesofexperimentalresindentalcompositescontaining1phenyl12propanedioneorphenylbis246trimethylbenzoylphosphineoxideasaphotoinitiator AT szynkowskajozwikmałgorzataiwona evaluationoftheselectedmechanicalandaestheticpropertiesofexperimentalresindentalcompositescontaining1phenyl12propanedioneorphenylbis246trimethylbenzoylphosphineoxideasaphotoinitiator AT gozdektomasz evaluationoftheselectedmechanicalandaestheticpropertiesofexperimentalresindentalcompositescontaining1phenyl12propanedioneorphenylbis246trimethylbenzoylphosphineoxideasaphotoinitiator AT klajnkatarzyna evaluationoftheselectedmechanicalandaestheticpropertiesofexperimentalresindentalcompositescontaining1phenyl12propanedioneorphenylbis246trimethylbenzoylphosphineoxideasaphotoinitiator AT kopaczkarolina evaluationoftheselectedmechanicalandaestheticpropertiesofexperimentalresindentalcompositescontaining1phenyl12propanedioneorphenylbis246trimethylbenzoylphosphineoxideasaphotoinitiator AT bociongkinga evaluationoftheselectedmechanicalandaestheticpropertiesofexperimentalresindentalcompositescontaining1phenyl12propanedioneorphenylbis246trimethylbenzoylphosphineoxideasaphotoinitiator |