Bio-Based Polyurethane Foams for the Removal of Petroleum-Derived Pollutants: Sorption in Batch and in Continuous-Flow

In this paper, we evaluated the potential of two synthesized bio-based polyurethane foams, PU1 and PU2, for the removal of diesel and gasoline from water mixtures. We started the investigation with the experiment in batch. The total sorption capacity S (g/g) for the diesel/water system was slightly higher with respect to gasoline/water, with a value of 62 g/g for PU1 and 65 g/g for PU2. We found that the sorption follows a pseudo second-order kinetic model for both the materials. The experimental data showed that the best isotherm models were obtained with Langmuir and Redlich–Peterson models. In addition, to provide an idea of the process scalability for future industrial applications, we tested the sorption capacity of the foams using a continuous-flow of the same oil/water mixtures and we obtained performances even better with respect to the batch test. The regeneration can be performed up to 50 times by centrifuge, without losing efficacy.