Polarisation Control in Arrays of Microlenses and Gratings: Performance in Visible–IR Spectral Ranges

Microlens arrays (MLAs) which are increasingly popular micro-optical elements in compact integrated optical systems were fabricated using a femtosecond direct laser write (fs-DLW) technique in the low-shrinkage SZ2080(TM) photoresist. High-fidelity definition of 3D surfaces on IR transparent CaF(2) substrates allowed to achieve ∼50% transmittance in the chemical fingerprinting spectral region 2–5 [Formula: see text] m wavelengths since MLAs were only ∼10 [Formula: see text] m high corresponding to the numerical aperture of 0.3 (the lens height is comparable with the IR wavelength). To combine diffractive and refractive capabilities in miniaturised optical setup, a graphene oxide (GO) grating acting as a linear polariser was also fabricated by fs-DLW by ablation of a 1 [Formula: see text] m-thick GO thin film. Such an ultra-thin GO polariser can be integrated with the fabricated MLA to add dispersion control at the focal plane. Pairs of MLAs and GO polarisers were characterised throughout the visible–IR spectral window and numerical modelling was used to simulate their performance. A good match between the experimental results of MLA focusing and simulations was achieved.