Review of Zinc Oxide Piezoelectric Nanogenerators: Piezoelectric Properties, Composite Structures and Power Output

Lead-containing piezoelectric materials typically show the highest energy conversion efficiencies, but due to their toxicity they will be limited in future applications. In their bulk form, the piezoelectric properties of lead-free piezoelectric materials are significantly lower than lead-containing materials. However, the piezoelectric properties of lead-free piezoelectric materials at the nano scale can be significantly larger than the bulk scale. This review looks at the suitability of ZnO nanostructures as candidate lead-free piezoelectric materials for use in piezoelectric nanogenerators (PENGs) based on their piezoelectric properties. Of the papers reviewed, Neodymium-doped ZnO nanorods (NRs) have a comparable piezoelectric strain constant to bulk lead-based piezoelectric materials and hence are good candidates for PENGs. Piezoelectric energy harvesters typically have low power outputs and an improvement in their power density is needed. This review systematically reviews the different composite structures of ZnO PENGs to determine the effect of composite structure on power output. State-of-the-art techniques to increase the power output of PENGs are presented. Of the PENGs reviewed, the highest power output belonged to a vertically aligned ZnO nanowire (NWs) PENG (1-3 nanowire composite) with a power output of 45.87 μW/cm(2) under finger tapping. Future directions of research and challenges are discussed.