Application of Turbiscan Stability Index for the Preparation of Alumina Photocatalytic Membranes for Dye Removal

In this work, for the first time, the stability of the TiO(2) suspensions used for the photocatalytic membrane preparation was studied by considering the Turbiscan Stability Index (TSI). The use of a stable suspension during the membrane preparation (by the dip-coating method) permitted a better dispersion of the TiO(2) nanoparticles into the membrane structure due to a reduction of agglomerates formation. The dip-coating was performed on the macroporous structure (external surface) of the Al(2)O(3) membrane to avoid large reduction of the permeability. In addition, the reduction of the suspension infiltration along the membrane’s cross-section allowed us to preserve the separative layer of the modified membrane. The water flux was reduced by about 11% after the dip-coating. The photocatalytic performance of the prepared membranes was evaluated using the methyl orange as a model pollutant. The reusability of the photocatalytic membranes was also demonstrated.