Experimental Study on the Effect of Limestone Powder Content on the Dynamic and Static Mechanical Properties of Seawater Coral Aggregate Concrete (SCAC)

The development of island construction concrete can serve as a basis for the development and utilization of island resources. Complying with the principle of using local materials to configure seawater coral aggregate concrete (SCAC) that is able to meet the requirements of island and reef engineering construction could effectively shorten the construction period and cost of island and reef engineering construction. In this paper, quasi-static mechanical experiments and dynamic mechanical experiments were carried out on SCAC with different limestone powder contents. High-speed photography technology and Digital Image Correlation (DIC) were used to monitor the dynamic failure process and strain field of SCAC, and the influence of limestone powder content on the dynamic and static mechanical properties of SCAC was investigated. The results showed that, when the limestone powder content was 20% and 16%, the quasi-static compressive strength and quasi-static tensile strength exhibited the best improvement. Additionally, with increasing limestone powder content, the dynamic tensile strength of SCAC first showed and increasing trend and then a decreasing trend, reaching its maximum value when the limestone powder content was 16%. Moreover, the maximum strain value of SCAC with the same limestone powder content increased with increasing strain rate grade, showing an obvious effect on strain rate.